|02-04-2013 02:14 AM|
|Nevin W||Revive of old thread, I have this same issue. The car came from the states do there is no wiring to the R12 Relay. Any ideas?|
|11-08-2011 08:56 PM|
|thenorm||DRL's were always really close to full strength low beams, i would guess %90 of the intensity|
|11-08-2011 07:51 PM|
I don't know if this will help, but check this out maybe there is information that will help you understand what to do.
|11-08-2011 07:10 PM|
Change wiring - DRL is at 100%
I have a 2002 Focus SE that I bought while I was in the US. When I moved to Canada, I asked the dealer to add DRL as it is a requirement in Canada.
I later realized that the dealer made the following changes :
1) The low beam is being used as DRL
2) The light is always switched on at 100%, as I do not see any difference in the intensity even when I turn the switch from Off to "LIGHTS" position
I want to remove this wiring, so that I can use the Parking lights for DRL.
Any help would be greatly appreciated.