|03-19-2016 07:02 PM|
|amc49||Messed up TPS will certainly affect shifting sometimes, depending on how messed up.|
|03-19-2016 03:35 PM|
|03-19-2016 03:32 PM|
|demell||Hi i have an 04 focus 2.0 ztec and it pops out of gear when trying to shift into 3rd but only when cold then its perfect also the only codes i ever get are the tps and ive replaced it 4 times now and the latest i got from ford itself but still giving me that code! Also once and awhile i can smell a burning smell. i've also replace the mass air flow trying to get the tps code to stop tripping checked the wiring and all seems good not sure where to go from here! Thanks!|
|02-14-2016 11:34 PM|
Define 'lag' better, a poor word choice that can mean more than one thing there.
Trans can be worn out at that mileage and you know what that means.
|02-13-2016 04:26 PM|
|crazyjess||I have a problem with my transmission, it lags when it shifts from 2 to 3 gear. I have an automatic transmission 2004 Duratec 2.3l with 189,000 miles. I'm trying to figure out the issues..|
|12-21-2015 03:03 PM|
|lonleyboy54||Yes lol One long, and 2 short Middle one short?|
|12-21-2015 01:41 PM|
|scoobyvoodoo||Yes it plausible for sure. Not trying to be condescending or anything by asking but...are you sure your replaced the correct one?|
|12-21-2015 01:30 PM|
04 focus, 2.0 DOC Changed "A" solenoid?
I changed "A" solenoid, because I got Code P0750, and it was shifting slow. NOW it will not go into 3rd. It just reves, like it was put into neutral. Could I have gotten a bad Solenoid? (Auto Zone)
|12-21-2015 01:26 PM|
|lonleyboy54||My 04 2.0 DOC, is giving me a problem. I changed "A" because it was slow shifting into 2nd,Code P0750 came up so I changed "A", Now it does not shift into 3rd. It just reves ,like it was put into neutral? Could it be a "bad" solenoid?|
|11-29-2015 08:36 PM|
|This thread has more than 10 replies. Click here to review the whole thread.|