|06-15-2014 06:54 PM|
|Mtzg18||Ok thanks, I think I know where it is your talking about.|
|06-15-2014 05:19 PM|
|06-14-2014 07:26 PM|
I have a st front bumper on my se, I'm really wanting to do this mod but I don't know where the best place would be to place the hose exit. Any suggestions on this?
|04-22-2014 01:11 PM|
Can't wait to install!!!
Been sick for a week and first day back at work and all the parts are in!!!
(Shipping at work so the wife don't see it :P )
Also got an OBD II reader matched with Torque Pro. Will post some result before and after, should be interesting.
Thx Newmission! & Seminoles too!
|04-21-2014 07:47 PM|
|andydena27||This was the first mod that I did to my car. It has really made a difference. I took out the bottom insert in the triangle piece, installed an offset air brake duct right behind it, and added a 3" id radiator hose from the duct right to the bottom of the airbox. The whole installation is not noticable unless you really look for it. Fuel mileage seemed to increase also. Next is a tune and exhaust. I put 100 miles a day on my focus and not a day goes by that I do not look forward to driving it.|
|04-20-2014 04:22 AM|
2012 Focus Custom Ram Air How-To
If you look someone did it with a hose that fit in the preexisting hole for the air box resonator at the very bottom. Just take the bottom pice to home-depot they will help you out. I used rigid vacuum cleaned hose.
|04-20-2014 02:11 AM|
|Seminoles||Around 30 to 50 depending where you get them you have to get the whole triangle check out village ford in the form.|
|04-19-2014 08:10 PM|
|Albarry||I just did this mod and all I can say is I wish I did it a long time ago. Great idea and really simple I'm getting 10° cooler intake air temps awesome work|
|04-17-2014 05:20 AM|
|Nogard||Its looking that I'm going for it.|
|03-06-2014 07:22 PM|
|This thread has more than 10 replies. Click here to review the whole thread.|