|02-17-2016 11:27 PM|
|02-16-2016 10:27 AM|
|mikhailyo||sorry to revive an old thread, I recently bought a 2006 ZX3 SE which sadly has no pre existing wiring harness :( bummer! but anyways, I am a beginner at all the wiring and relay and all the electrical stuff but it seems pretty straight forward. only problem is it's an old thread and some of the pics I can't see or find >.< been wanting to add fogs since I got it. anyone able to help me out? want to use oem fogs & an oem headlight/fog switch. and also would any of the wiring or switched off an older model still fit the same? any and all help would be great!|
|03-06-2015 01:18 AM|
|christopher||what are the correct wires on the oem wiring harness to use an oem fog light switch?|
|06-20-2014 03:38 AM|
|sailor||Here's a link to installing fogs with pre-installed harness:http://www.focusfanatics.com/forum/general-technical-chat/432201-how-adding-fog-lights-mk1-pre-wired-chassis.html|
|04-05-2014 03:36 PM|
|11-29-2013 07:30 PM|
2007 Focus Install
Getting ready to do this on my 07 Sedan. have the switch lights and bezels. Will the bezels and lights fit in the existing grill or do I need a grill made for fog lights?
GREAT WRITE UP!
|02-14-2013 02:35 AM|
Deffinatly helpful. I now have a new summer project.
Sent from my MOTWX435KT using FF Mobile
|02-13-2013 10:21 PM|
|homelessmonkey||very nice write up|
|01-26-2013 08:22 AM|
|OPsDad||For those of you with '12 or '13 Foci putting on factory fogs, you can get the connectors for those lamps at your local parts store (I used O'Reilly) for about 8 bucks each. They are "H8/11" connectors. No need to buy the Motorcraft ones for 30 or 40 bucks each!|
|01-06-2013 04:49 PM|
|anarchy0392||Does any one know where the green/black wire is under the hood cant find it at all?|
|This thread has more than 10 replies. Click here to review the whole thread.|