|12-16-2013 11:48 PM|
|12-16-2013 10:19 PM|
|Joeywhat||I didn't need to remove any trim to do mine.|
|12-16-2013 10:11 PM|
|FamousMassacre||Are you doing like a large sub build? I calculated you can get around 4 15"s ported under window line so if you compete you'll be in the superstock class|
|12-16-2013 10:52 AM|
|12-14-2013 03:36 PM|
|Joeywhat||There are three brackets holding the two individual seat backs (although I guess only two if your car has a single rear seat back). There are clips on either side of each back going into a bracket. I can't remember exactly what the motion is, but you turn or push or pull a little knob to open up the clip and it slides right out of the bracket. That then exposes the bracket bolts, if you want to remove the brackets as well.|
|12-14-2013 03:11 PM|
|11-05-2012 06:40 AM|
Interesting, thanks for sharing this.
Would be really handy for those using their Focus to haul or deliver stuff a lot! I've started seeing quite a few places around here using Focus's as parts haulers and it makes me wonder whether they've done something like this.
|10-25-2012 01:57 PM|
|Faygo Focus||El Focus Camino?|
|10-25-2012 01:13 PM|
For just the seat bottoms, it's two bolts per seat. Not sure if non 60/40 seats are different.
I've since removed the seat backs and basically gutted the hatch area. Will be building a new floor soon.
|10-25-2012 01:09 PM|
|tha1mar1986||how many bolts do u have to take out?|
|This thread has more than 10 replies. Click here to review the whole thread.|