|09-15-2015 08:48 AM|
|Darren4868||I have run into the same problem on my front door panels, I plan on doing something similar and have a heat gun yet I was wondering how long should it take to remove the foam inserts that are underneath the original fabric from the front door panels? Right now this is what I'm looking at:|
|05-07-2015 10:38 AM|
Old thread is old, but I didn't see anyone mention it.
In the various interior projects I've completed in many different cars over the years, I think contact cement would be the best way to re-adhere the inserts to the door panels.
Good write up though, I've been considering redoing my inserts in the SVT since the cloth has come loose from a couple of the doors.
|05-04-2015 09:27 PM|
|HornetRacing66||Very nice. I have been thinking about doing my headliner, pillars, and visors like that.|
|09-11-2012 04:44 PM|
|Janger22||AWESOME post dude. I was looking for info on this for a really long time. I'm thinking of doing Lime color inserts to match some racing seats and a new paint job i'm getting.|
|08-25-2012 01:53 PM|
|Blue5ive||Not sure on what models they did this but my 03 zx5 has molded ABS plastic inserts on the door panels and not the horrible chipboard. The abs panels come off easy so you can reupholster them.|
|07-27-2012 12:40 AM|
|Papa kski||Thanks for the instructions, I've been wanting to do this to my 2000 cuz the stock is so boring but i was too scared to mess everything up cuz I didnt know what to do|
|03-08-2012 04:56 PM|
|stealthzx3||what brand of epoxy did you use?|
|03-07-2012 10:09 AM|
I really need this info
thanks guys and gals
I'm doing mine pretty soon :)
|03-06-2012 11:44 AM|
yeah, because i have a general idea how to go about it from the last project.
i'll post pics when completed!
|03-05-2012 11:32 PM|
|Davey Boy||Then this should be no problem! And don't worry too much about messing it up, it's pretty easy.|
|This thread has more than 10 replies. Click here to review the whole thread.|