|10-06-2012 06:11 PM|
|stealthzx3||the fit isn't terrible. quality, meh, i'm not extremely satisfied with them, but they work. it feels it's made from different plastic than the oem mirrors.|
|10-06-2012 06:00 PM|
You can use strandedwire if needed. Also can use silver wire instead of copper since silver is a better conductor of electricity than copper.
Have thought about power M3 mirrors with leds just to change things up but not sure of the fit and quality.
|10-06-2012 02:05 PM|
|stealthzx3||i'll see what i can find. thanks for your help!!|
|10-06-2012 01:58 PM|
|TerryB||Yeah, it doesn't need thick gauge wiring at all. I just happened to have a small bundle of phone wiring around. I've actually used it quite a bit. It has to be the copper wire though. Not the stuff that has thin strands inside.|
|10-06-2012 12:43 PM|
|stealthzx3||you used telephone wire terryb? that's nice i don't have to use so much of my expensive power wire. can it be any power wire? like speaker wire?|
|10-04-2012 03:36 PM|
|stealthzx3||no power to them? i guess it's not really necessary.|
|10-04-2012 03:34 PM|
|TerryB||Okay. I only have a two wire setup. LED turn signals only.|
|10-04-2012 03:14 PM|
sorry, i meant the power part of the mirrors. or, the motor that makes them move? lol
there is 4 wires; white, blue, yellow, and green.
|10-04-2012 02:56 PM|
Just tap into the power off the front turns. You have parking light in the middle wire ( orange ). Outside wires are turns ( blue ) and ground ( black ). Of course black being the ground. You won't have to touch that. Unless you want to run your wires all the way.
|10-04-2012 02:45 PM|
|stealthzx3||ooh i see now. i still don't know how to wire the power part.|
|This thread has more than 10 replies. Click here to review the whole thread.|