|02-23-2016 06:04 AM|
|felixthecat||Some do, But I'd check them. btw, I run Denso iridium it20's in my 23.|
|02-22-2016 01:05 PM|
I've got a 2004 ZX3 2.3L PZEV, so a little earlier than this thread is nominally about... 286K miles on it, had its first spark plug change last year by a shop trying to troubleshoot misfiring on cylinders 2 and 3. I don't know what kind of plugs he put in, but I think they were iridium (I remember the package had purple on it and it seemed exotic, lol, I had never heard of iridium before).
The plugs change didn't help, but replacing the coil *boots* did, back then.
A year later, misfiring again, this time on cylinders 1 and 4. This thread has been great, answered a bunch of my questions. If I replace the plugs again, myself, it will be with the stock OEM plugs. I'm more interested in long life than in performance. Per the Ford dealer, the part number for my car is AGSF2YPC and they are $13.46 apiece.
Question: Do the OEM plugs come pre-gapped, or do I need to gap them myself?
|08-01-2015 05:45 PM|
|07-30-2015 10:43 PM|
|notfortheweak||Just put the autolite 103s in. Better idle, more pep. Iridiums were put in 5 k miles ago. Car hated them.|
|06-08-2015 04:28 AM|
|puffingonj||Any turbo guys had the autolite a103s plugs separate?? I can take the porcelain and spin it in the steel. Replaced with new set 3 days later same thing. Since then I put the ar103s and I have yet to pull a plug and check them. Just wondering|
|06-07-2015 11:29 PM|
Correct, this is the Duratec Performance '08-'11 section for MkII owners.
Try the MkIII sections, your engine type is Duratec TiVCT.
Welcome to FF, you should find a lot of info. once you get into the MkIII sections & general areas that fit all models.
|06-07-2015 07:18 PM|
Guys, this thread is a bit old, I have a 2013 Focus SE, Autolite A103 apparently do not fit on this year.
Stock plugs are Motorcraft SP-535
what is the deal with these Foci and this dead spot lag when at full stop and gassing it, i hate it, it sucks.
|02-20-2015 02:45 AM|
|09-30-2014 01:31 PM|
|ellmarshptbo||well I changed my spark plugs today in my new to me 06' Focus. I used Autolite 104 coppers. I did not know the mileage of the plugs, but the previous owner had put Bosch platinum's in her! they didnt look too bad, electrode was worn. I guess on the bright side they were not factory at 200XXX KM's ;) I was greeted with better start up, better accel espcially in 1st gear and a smoother idle. Thanks everyone!|
|07-26-2014 02:38 PM|
|PSUrivie||When you change your plugs, use either anti-seize or go old skool and use a dab of oil on the threads of the plugs to they don't corrode in the head.|
|This thread has more than 10 replies. Click here to review the whole thread.|