|07-25-2011 03:44 PM|
|mellephants||Thanks. Don't worry about it, I don't put much stock in those things anyway.|
|07-25-2011 02:33 PM|
|Buickboy||Wish I could rep you, it won't let me rep any of your posts in this thread. Thanks!|
|07-24-2011 09:20 PM|
|mellephants||Yes, if you are only using one of the two analog inputs, then you can tape off the unused analog input|
|07-24-2011 04:24 PM|
|07-24-2011 01:26 PM|
AEM [+] --> XCAL Analog 1
AEM [-] --> XCAL Ground
|07-22-2011 04:51 PM|
Bumping this, Im trying to set up my analog AEM wideband to my XCAL2:
I have these coming from the AEM:
White: Analog Out +
Brown: Analog Out -
And going by the above, the XCAL needs
What goes to what? Thanks!
|08-23-2010 08:16 PM|
i figured the wires out
my multimeter needed a battery so it wasnt working right
do you only need one analog
and the ground
i have the same auto meter wideband, so i would just hook up the ground nd analog 2
and be fine
or do i have to combine the analog 1 and analog 2 wires together to plug into the wideband??
im gonna go with only plugging in the analog 2 and the ground so far and testing that out
|08-23-2010 07:23 PM|
Why are you running of MBT and not borderline?
|08-23-2010 05:52 PM|
what do u set the multimeter to?
|08-23-2010 05:39 PM|
|mellephants||Use a multimeter to find out which wire is connected to each pin.|
|This thread has more than 10 replies. Click here to review the whole thread.|