|07-25-2015 07:40 PM|
|Sniper Focus||No difference as long as the layout is the same. A circuit board can come in all colors... They just had a different shade of green at the time.|
|07-25-2015 05:03 PM|
|reddy1||Alright well I now have joined the 10 dollar cougar club I took it apart just to make sure everything was clean so I dony have to take it out again... Now I have a delima and that is while I have both boards off should I use my og board or the cougar board the coigar board seams to have a slightly darker background than the focus board which is just green in the background. (Tried to post a picture but it didn't like it) thanks so much for all the help im super excited to see how my car was ment to work :)|
|07-25-2015 02:56 PM|
|reddy1||Shoot well thanks|
|07-25-2015 02:44 PM|
^^ That's for the cruise control....
The IMRC is located under the "Duratec V6" engine cover. Much easier to get to than in our cars.
|07-25-2015 01:49 PM|
|reddy1||Regarding the last two posts about imrcs from v6 cougars I just snagged one out of a 99 but it looks like this and has a different plug style I grabbed it anyway May have to try again idk has anyone seen one of these? The one sniper took a picture of looked like an exact match I have more pictures but its only letting me post one agh I want an imrc by nexr weekend sooooo bad|
|07-15-2015 05:24 PM|
Skip desoldering and knock the epoxy out.... less chance of damaging the PCB with heat too.
Got this one out of a Cougar for a spare, $11 bucks. Looks like a cable swap would take only a few minutes if you really wanted to use the SVT one.
|07-02-2015 04:55 PM|
An update for people with motors that pull, hold for a few seconds and then let go again: That's because the self test failed to see the contact inside the unit closing. It then shuts off the unit and throws the famed code. My original unit was not pushing power to the motor inside at all. The used unit I picked up just needed the fluff cleaned out from between the contacts and it worked immediately. Both failures throw the same code.
|06-08-2015 03:01 PM|
|06-04-2015 10:04 PM|
|reddy1||To those of you who got a new one and then found this thread anyone still selling for parts? (The plastic guy that pulls the wire inside the actual imrc module is a goner)|
|05-30-2015 06:03 PM|
|Sebem777||Can't explain how much this thread helped me recently with changing out my irmc, thanks a ton|
|This thread has more than 10 replies. Click here to review the whole thread.|