|05-06-2013 09:58 AM|
|Drumr90||This is going to help me alot with my bumper and skirts.|
|06-07-2011 06:38 PM|
|06-07-2011 06:31 PM|
Here are pics of the scratch. 1st pic is the raw damage. 2nd pic is after using "scratch doctor" (specifically chosen as it is gentle). It's better, but it's not gone. suggestions?
1st pic. the damage
After attempted repair
By soitgoes at 2011-06-07
|06-06-2011 02:14 PM|
|S0C0nFused||yes. Will post a pic asap. I got about 3 things going atm. this would be a good scratch to demo on.|
|06-02-2011 11:53 PM|
Its not the number of coats but the product you use. A laquer based product will not provide good chip resitance. A urethane will however, like the Rust Oleum black you used on your lip. Lacquers are just to brittle and chip easily.
|05-31-2011 10:56 AM|
Unrelated to prior post. I have some pieces painted with Dupli-color. There website suggested sanding the final base coat to bring the metal flake up. I have some 1500 grit wet/dry sandpaper. Proceed?
Also. How many coats of clear are recommended to provide some rock protection? (Is there ever enough?)
|05-31-2011 09:43 AM|
If I missed this in prior posts, sorry! I have recently gotten a scratch on the front fender. It looks like a tree branch possibly hit it (The Saint Louis tornado missed my house by about 100 yards). The scratch is in two parts, The top part of the scratch, if you run your fingernail over it (gently), you can just sorta feed an edge (if you have your fingernail angled wrong you will miss it. that slight!). The bottom portion, I cannot feel a ridge. The whole scratch appears as milky white. How should I approach this?
|04-28-2010 09:38 AM|
Thanks Norcal!!!!!! Holy hell I'm more excited than ever to get this started. Pops was like "just go to Maaco"...screw that. If I can DIY something right, I'll take the time and research to do it myself. Only thing I didn't do on my bike was powdercoating and paint....suspension swap, all mods, other custom janks was all me. Some jobs took a couple weekends but love to DIY.
About the gun, its a 3 gun set. http://www.tcpglobal.com/spraygundepot/tcpgate.aspx Include the Regular gun, primer (bigger tip?) gun and smaller touchup gun, regulator, filter and filling stand. Plus its got great reviews. For 80 bucks I can use it for more than just my car....can do my buddies track bodywork when they wreck (every other weekend lol).
Gonna do a DIY spraybooth...pvc drops.....pvc tubes, box fans...the correct respirator. I live in a redneck neighborhood and am friends with my neighbors...I don't think they'll care. We park on our lawns around here ;)
OEM paint can be bought here http://www.automotivetouchup.com/cho...+No%2C+*+66460 (thats Blazing Copper btw) $40 for pint, $80 for a quart. Dunno where/which primer and clearcoat to buy.
Also for the DIY paintjob, http://www.thebugshop.org/bsfqpnt.htm This guy goes through the whole dayum thing as well.
|04-28-2010 08:22 AM|
|MasterJedifocus||thanks much for the info. Give me some heads up on where to find the Nor Cal area of this site. I'd love to come out to some of your meets and see other foci and meet some drivers.|
|04-28-2010 12:27 AM|
Ok lets see of I can help out...
Painting a 6x6 area can be done, but it will never look prefect. Ive done it and gotten away with it on my car, but thats casue its white, metallics and dark colors make it a lot harder to match a small area.
Airbrush would be good for small, small scratches but for a 6x6 area, like 02Zetecse said the paint would be to thin and take forever to get a decent build on it.
a 6hp compressor with a 30 gallon tank should be fine. Make sure you have a pressure regulator for the hose pressure, and a moisture catch. A $80 gun is a lot of money for a gun for a newbe. If you never had painted before, do you think that you can tell the differance between a $80 gun and a $20?
Spraying with a base coat clear coat isnt as hard as you think. If your wanting to do the fenders and hood, thats good because you can do them off the car and lay them flat. Making it harder to get runs and sags. Base coat you lay down till it covers, then lay down a tack coat of clear, then a nice wet coat of clear. If you have a little orange peel no biggie, wet sand it smooth, then polish and buff it back to a shine. Spray even slightly overlapping each pass. Make sure you pull the trigger before you hit the pannel then left off after the pass has been made. Hold the gun a a consitant distance from the pannel and walk the gun across the pannel. Do not arc or rainbow your arm back and forth.
Chalkboard spray paint http://www.rustoleum.com/CBGProduct.asp?pid=110 should be able to find it at any home depot. We dont allow any krylon in this thread
MasterJedi check out the Nor Cal area of the site! Make sure to come out to some of our meets. If you need any help hit me up, Im pretty close to ya, Im down in Manteca.
|This thread has more than 10 replies. Click here to review the whole thread.|