|05-10-2012 10:57 AM|
I have never got the GenII to work properly with any Focus , I like best the 6.5 , you cant go back to the 5.1 from what I was told it wont work with the later firmware
|05-09-2012 11:18 PM|
The Livelink 2gen is heavy, I would like to back to 5.1 version.
|05-09-2012 10:51 PM|
|crzyclown||I talked to Tom about the issues in my last post. He suggested that I start my car then start the datalog. It worked on the second try. I'd say that the connection between the car and the Livewire gets disconnected about 50% of the time when I try to load the settings. Any how, it finally worked so I thought I'd share what I did.|
|05-05-2012 01:33 PM|
2003 Focs SVT
When I start datalogging either it fails to datalog and the connection from the ECU to the Flashwire fail OR when I start my car the connection from the ECU to the Flashwire fails. Every time. I've tried at least 10 times and it's always one or the other. Anyone else ever had this issue?
It's just the action of turning the car on. I just turned the key real quick to see what would happen and it stopped the data log too. Car never started, just turned over once. I'm confused as to why cycling the ignition would cause this. Somehow it breaks the link between my Livewire and the ECU.
|04-19-2012 10:34 AM|
You know I can take over your laptop and try to help just let me know
|04-19-2012 12:03 AM|
I'm getting an error while trying to run the Livelink 5.1
Error message is:
"Handheld Device Initialization Failed: Check USB/OBD-II connections and verify that ignition key is ON."
Device X3 (XP s/n)
Ford Focus 2006 2.0 / Strategy WNCDAQ4
Win XP 32bit SP3
Could ayone help?? The laptop has a fresh XP installation.
|02-09-2012 05:53 PM|
|PSUrivie||Did you check the voltage at the analog wire and make sure you're getting a voltage??|
|02-09-2012 05:42 PM|
fs werks told me call sct sct made it seem that fswerks needs to help me and no onr out here i trust can make it work...
Posted via FF Mobile
|02-09-2012 05:39 PM|
yea i did that and nothing dies vhe cable need to be grpunded as well???? all sifware is up to date... just wide band in car reads good just to the computer its 0.0 and i set it up on the phone with sct.. im actually abput to just give it up and pay 800 for someone else to deal with it.
Posted via FF Mobile
|02-09-2012 05:07 PM|
|PSUrivie||Did you swap the wires like we talked about? If you did check the voltage on the analog wire at the Wideband. Also, have you updated the firmware on the device and have you updated livelink?|
|This thread has more than 10 replies. Click here to review the whole thread.|