|04-10-2015 06:04 AM|
Best guide on the net! Thank you!
Did you do final torques on the front lower control arm bolts before you attached the knuckle? While it was just floating?
|03-14-2015 06:14 PM|
|03-14-2015 06:13 PM|
Got me, should have waited 'till the rain stopped to check the size.
Tx for the look up & correction.
|03-14-2015 05:59 PM|
|03-14-2015 02:34 PM|
So low you'd need an inch/lb wrench to measure. (92 in/lb. max. is std. value for 6mm.)
Snug tight with finger pressure, if you grab a wrench & reef on it with your whole hand you'll break them off.
I assume you mean the strut mount bolts, the only top mount with three.
Edit - Miztaken I am, 8mm not 6mm so they're good snugged by hand.
|03-14-2015 02:22 PM|
|LarryTate||Whats the torque specs for the 3 mount bolts (top) on the shock?|
|01-28-2015 10:20 AM|
|01-08-2015 10:39 AM|
|01-08-2015 10:26 AM|
|Silver04Focus||What kind of issues were you having prior to changing all of that? I'm having a strange noise when i turn the wheels left or right both at speed and at stop. the sound is like a creaking/grating noise.|
|06-26-2014 10:58 PM|
|ericvand||Amazingly detailed!!! Great job with everything. I'm new to Ford. I've a 2009 Ford Focus that absolutely has the worse suspension system, so that's the first upgrade on my list, second will be the brakes. I'm curious as to about how much you all would think I would need to invest|
|This thread has more than 10 replies. Click here to review the whole thread.|