|05-17-2011 01:25 AM|
|muttsnutts||All you need to do is cut the red/green wire at the hazard light switch, that removes the brake lights, but you still have indicators, splice the wires at the back to the old reverse light fit an orange bulb then you have indicators, for brake lights tie into the third brake light (Which still works after you cut the red/green wire at the switch) there you go job done|
|05-04-2010 11:32 AM|
Thanks for the pics!!!
I'm going to attempt this mod on my ZX3 w/ some smoked Euro-taillights... I'll take some pictures when I do.
|01-26-2009 01:10 PM|
|faster_than_u||use this how to if you have a 2002-2007 http://www.focusfanatics.com/forum/s...ad.php?t=65546|
|01-26-2009 12:45 PM|
|faster_than_u||THIS METHOD DOES NOT WORK!! there is another how to im looking for that is the proper way. with this way both lights flash|
|01-26-2009 10:13 AM|
does the whole light blink with the blinker now or just the actual blinker? because i think ive only seen 1 or 2 people who have it so only the blinker blinks
and holy thread revival! (i didnt check the date of the OP lol WOW)
|01-26-2009 07:37 AM|
great write up!
also like to add that,
instead of cutting the socket to fit the euro lights
you can use a file on the inside of the euro light were the bulbs connect too make the plug fit.
so you dont have to worry about wrecking the stock connectors
|10-10-2006 09:43 AM|
|joel22484||any pics darth?|
|10-09-2006 01:44 AM|
sorry to bring back a dead thread
...but i'd like to do this and keep the reverse lights? is there any way to wire up my '01 zx3 tails to make the reverses both turns and reverse?
|09-17-2006 01:42 AM|
|Darth Focus||They do make em...|
|09-16-2006 11:39 PM|
|arrestmespi||it was very easy to do, I wonder if I can get some euro spec sedan tails|
|This thread has more than 10 replies. Click here to review the whole thread.|