|01-15-2013 03:28 PM|
|10-03-2012 08:03 AM|
|10-02-2012 01:04 PM|
|Gobliz||Why not learn to remove and sauter some new LEDs? or is it not that simple?|
|10-01-2012 08:13 PM|
|Pyro515||If you sand down the color on the display glass and change out the led's you can change the color to whatever you want. That's what I'm doing on mine|
|08-26-2008 12:36 PM|
if you disconnect the AUX gauges the needles will still glow but the green will be gone ;)
just a hint...i have aftermarket AUX gauges so that would work for me!
OLD THREAD RESURRECTED!!!!!
|12-13-2006 07:41 PM|
the speedhut Gauges were powered directly via another dimmer, so if I cut the power to the stock gauges, the needles went dark (which is really impossible to gauge speed) and so did the odometer.
|12-13-2006 07:39 PM|
here's some pics of two sets (mine and a friend's) i installed:
You can kinda see the ring around the black base of the needles, where you can see through to the stock gauges.
Here's some at night:
The ring "looks" blue but I haven't turned my actual lights on, I was just testing the overlays to make sure they were wired: http://www.deevlo.com/photoalbum/dis...?album=7&pos=5
Here's with the stock lights on underneath:
You can see the green a bit more. It's not THAT bad, but I'm REALLY picky.
What's worse is when those blue gauges are in, and the odometer is still green.... I'd rather it all be the same color...
I have a pic somewhere after I changed the odometer to blue.... but I can't find it. I bought some electroluminescent (EL) film/tape/stuff... and with a little soldering/sanding, I made it blue for my SVT... and red for a friend's '05 ZX3 (SVTs are WAY easier, because the gauges are already EL panels).
|12-13-2006 07:38 PM|
|davlafont||Come to think of it, there's gotta be a way of disconnecting the original gauge lighting so that it doesn't glow underneath, no?|
|12-13-2006 07:24 PM|
Do you mean these Speedhut guages? They're just overlays?
I was considering these for next spring. You can get the SVT logo in either "location" for $8. I would put the log on the tach and also add Piranha on the speedo (they do lettering for free). Black faces with red lettering was my thought, but not if the baby poop is poking its way through...
|12-13-2006 02:16 PM|
|Toolman00||I'll take the "baby-poop green" because it's different. I couldn't imagine it being another color unless if the background was black and the numbers lit up a different color.|
|This thread has more than 10 replies. Click here to review the whole thread.|