|05-25-2008 07:29 AM|
|SVTF200487||yep all the mounts are stock. I haven't been able to afford a new dogbone mount. But that is at the top of my list to buy.|
|05-25-2008 12:02 AM|
what motor mounts are you using?
during the vid i could hear the rear one slapping, once that starts it'll cause hop.
a good aftermarket mount or all mounts would help alot. the banging sounds like your running the stock mount.
|05-24-2008 06:02 AM|
Drag Help Needed
I finally got some video of my Drag racing at the strip. I was launching at 3500-3800k with my traction control fuse pulled. My tires are Nexen N3000 with about 35% tread left on them. I was running them with 28psi in them. If yall need to know I weigh about 275 and my pass. weighs about 160. All these runs are at best a 10.3 1/8 mile time. If yall could give me some hints on how to do better I would be thankful. I know with what all I have done to the car it will run better times.
When I had bogging issues:
When I had wheel hop issues:
This is the run I had clutch issues:
Here is one run where I ran a buddy's fox. He runs consistant 9.1-9.3 time:
Yes I do know it is about time for a clutch. It only acted up in that second run. And here is just another video I uploaded. (when I had my car dynoed they found the siren)
Thanks for all the help in advance.