|11-22-2014 04:49 PM|
AWESOME write-up! I'm gonna throw rep all over the place once I get to a real computer.
I had my front wipers crap the bed a month or two ago. I hit the stalk and they wiggle but don't move more than that. The other thing I noticed was the that they FINALLY "parked"... I've known the park function wasn't working correctly since '07, but I got over it to save money. I'd just fiddle with the timing of the swipe so they'd stop out of view.
|11-18-2014 03:39 PM|
As for your problem, you are correct there are no 18 and 19 relays. I then checked the Chilton books for the wiring diagram, confirmed no relays.
I would check the fuse 56 if its good I would check to see if power to the mtr. If there is power and its not running, change it out. if no power, I would look at the selector switch on the steering column. Good luck, hope this helped.
Our public library carries the chilton books online, so try your library for the wiring diagrams. they will give you the number and color of the wiring you should check.
|10-28-2014 08:41 PM|
I was so delighted to find such a detailed solution to this exact wiper problem that just popped up on my 07 Focus! Got ready to put some relays on order, then thought it best to go have a look at my car to confirm my relay location and type.
There aren't any relays in the R18/R19 location! No relays in the front fuse box that relates to the wipers, either.
Nothing on the web helps me find where the relays should be.
Any clues out there?
|10-28-2014 03:38 AM|
|10-27-2014 06:35 PM|
I snag then from Focus' at the junkyard.
|10-24-2014 06:45 PM|
|ZX4SES2005||Hi all, I replaced my front wiper relay, but now it clicks every time the wipers move, but only when in the intermittent setting. I don't have a rear wiper. Any suggestions?|
|10-20-2014 11:21 PM|
I have the same problem with my wipers not parking or working on the intermittent setting. However, when I replace the relay, the wipers won't turn off. Any ideas on what the problem may be now? Any help is appreciated.
|08-10-2014 08:45 PM|
I noticed that the new relay is "louder" than the old one, I guess Ford went with the gray one for its quiet operation.
I pulled apart the gray relay and the contact point was worn out and full of carbon.
|08-01-2014 12:02 PM|
Hello, I have a second hand US-Spec ZX5 Focus, and I'm having a wiper problem.
In my case the wiper goes back to park position but will not work in intermittent (1 to 6) speed!, I changed the wiper control switch but nothing happened. my rear wiper is not working as well.
I heard that there is a timer control module underneath the fusebox (Driver side) but when I tried to get to this module, I found the slot empty... Does any one knows or had similar problem ?
|02-07-2014 11:11 AM|
|barker1964||Less than 10 minutes problem solved. Thanks for the write up.|
|This thread has more than 10 replies. Click here to review the whole thread.|