|12-22-2007 03:54 AM|
|sleepyboy||whoa well thats your problem right there you have too much power lol just kidding there is never enough just not enough traction|
|12-22-2007 03:46 AM|
well as it sits i don't have any 60' times with the turbo setup. I managed a 13.2 at 112 with a 2.8 60' this was on a really sticky track with falken 615s and fighting wheel hop when i had the procharger on the car and i'm making more power now and I havn't even begun to turn the boost up.
I'm planing on running hoosier DR's but i'm going to have to go with a set for 16's being I can't fit anything over my breaks without buying some prorace 1s or another 15 that will fit over my TCE 11.75" mini BBK
|12-22-2007 01:15 AM|
if i disagree with someones post i'll tell them straight up. i dont take cheap shots.
i was simply stating what i thought is a good setup for all around use. it's what i use and i've had several different setups. with this im comfy taking long trips, driving around town, and strip.
someone used to have a set of rear end locks in design, but nothing ever came of them. simply was a couple heim joints with a link between that bolted to the subframe and lower arm, but as i said, never seen anything more on them.
simply put, we're stuck with what we have on the market to work with. no company has ever really gotten into making parts specifically for drag racing on the focus. most of us judt design and redisign until we find something that works.
|12-22-2007 12:45 AM|
|12-22-2007 12:27 AM|
|sleepyboy||what are your 60' times?|
|12-22-2007 12:26 AM|
??yeah I'm missing it too? also that is a uber hot pic of the drag radials there.
Seems like you have about everything you can do so tires would definitly help
|12-22-2007 12:23 AM|
|goinloco1||ok, how the hell did i dis him?|
|12-22-2007 12:16 AM|
He disses you and then goes on to recommend an eibach kit and swaybar???? LOL a swaybar imparts ZERO damping when both sides move equally, and the eibach kit is basically a stock svt setup with better manners.
pwned him though by posting a pic of drag radials on your car - thats the hotness.
|12-22-2007 12:07 AM|
|12-21-2007 11:49 PM|
I probably should have posted what i already have.
I have all three bushings, the ingals stiffy, complete urathane suspension kit, both H&R sway bars, and the H&R cupkit which is currently really tired. I'm looking at getting the Gaz coilover kit and then i'm also getting the lakewood traction bars. between everything else I should be able to have just about the perfect setup for traction when i want it. Plus i'll be able to adjust it for regular driving.
|This thread has more than 10 replies. Click here to review the whole thread.|