|01-28-2015 06:28 AM|
|lc_fortune||I want to do this on my 99 focus is that possible, and if so what lightbulb should I need??|
|09-01-2014 11:46 AM|
Does the mod still work of you have a black backing?
|02-14-2014 11:11 AM|
|starfuryt550||Ps, since you have an Svt all the cluster bulbs would be t10 bulbs.|
|02-14-2014 11:10 AM|
No, you won't be able to.
You will need 3x standard t10 bulb sockets from a normal focus cluster, as well as a brand new faceplate. You can disconnect the EL sheet from the main gauges and leave it. Plug in the bulbs and that will work, but you'll need the metal-monkey.co.uk or speedhut faceplate. You can't use the SVT one at all. It has a non-remove able filter, unlike the standard focus non-EL faceplates.
|02-14-2014 11:08 AM|
|02-13-2014 08:23 AM|
It's a t10 bulb if you have the 2000-2004 with the bulbs and not leds. If you need SMD leds like in the pics above, they're 3528 size (plcc2).
The 2008-2011 focus uses plcc4 3528 leds.
|02-12-2014 04:31 PM|
|Burkeboy||I would like to do this to my Focus too but I want the bulb to fit right. Does anyone know the actual bulb size?|
|01-13-2014 09:05 PM|
Pic with the red paper filtering the lcd, this is a more true to the eye pic:
|01-13-2014 01:25 AM|
Actually, the soldered in LED's started in 04, ask me how I know. There is a quick fix, buy this:
After you get your black clip off, take as much of the material off the side that is closest to the mph needle housing and cover the old green led's with electrical tape, then hot glue the new panel in place over the old led's. I had to filter the brightness with 2 layers of red copy paper, it was hella bright. This is what it looked like before I filtered it, so yes, changing the color on 04 and up led's for the lcd/odometer display can be done! I wired them into the headlight switch wires to work exactly as it does stock.
You can make out the actual 6 led's on the panel though, light spread is not as even as the stock lighting, just a warning. I will get more detailed pics up of the current output up tomorrow night.
|01-08-2014 11:47 AM|
i believe this would work for the odometer...
but i don't know about the rest of the gauges. i think that is a whole different thing.
|This thread has more than 10 replies. Click here to review the whole thread.|