|12-15-2014 06:10 PM|
|beyond_theft||I'm going to check for this cause i have the same problem and done the same thing you have except ive had a timming belt issue|
|08-08-2014 05:08 PM|
|amc49||Hey, when that's all they make what're you gonna do??? If me you make up the whole thing out of conventional bulk hose so at least when it fails again you can replace it at 1/4 the normal cost. I no longer use the steel tube in the middle, rather custom bent/cut steel brake line and short adapter pieces of hose on the ends.|
|08-05-2014 11:14 PM|
|10-05-2012 05:43 PM|
|ChaosWarlord26||Have you read the entire thread? Because it sounds like you have checked everything but the possible vacuum leaks the thread is about.|
|10-03-2012 08:40 PM|
|evilmonkeytamer||im having a horrible miss in my engine. replaced the plugs, wires, and coil. took the injectors off and checked them and they were all spraying good. any more ideas? the car only has 80,000 miles. 2000 model split port 2.0|
|10-02-2012 04:03 PM|
Yes. It's called a PCV hose. Do not ask for a crankcase ventilation hose. You'll get the wrong one. I went through a hassle with rockauto because they had it listed in the wrong category and I got stiffed with the wrong one. You want this.
It's the newer version. It's mounted under the plastic intake manifold on the back of a Zetec. They wear out and collapse, or just split altogether. Do a search and you'll see plenty of pics. https://www.google.com/search?num=10....1.Gp0CtY_4Hhc
|10-02-2012 10:28 AM|
|09-08-2012 04:03 AM|
Ive got a 01 with ztec 259648 miles same idle il be fixing but first battery causea weak batt willcause alot of problems shuttin stuff off. I will be lookin for leak as well thanks for yhis helpfull thread
|07-04-2012 03:16 PM|
|GeeGee||I recently purchased a 2008 Focus SES and it has a rough idle. If you all noticed most of the intake parts are plastic....ya! So I started looking at the connections and found one of them appeared to be secure but it was actually cracked and loose. Fortunately it had a male type plug so I wrapped tape around the outside and inserted it back into the manifold and wrapped wire around it to hold it in place....It idles Great!. I couldn't believe how easy that was...you all might want to check for cracked fittings!|
|04-06-2011 07:33 PM|
Okay so i bought my first Ford and it was my 2001 focus ZX3 5 speed.Love it !!!!!!Lots of fun to drive then last week i did the "stupid" and ran it almost out of gas since then it has had a rough idle but also noticed about a couple days before that there was like a hissing/sssshhhhh noise.So i did some research and put gas treatment in then that didn't work so i got some trottle cleaner and cleaned the throttle body.That massde it run a little smoother now back to a rough idle at stop lights,like it's gonna die and rpms go down to about 750.
Engine light came on so went to the autozone and some 19001 code came about oxygen sensor.
I love my focus and of course the gas mileage and the zoom zoom of it.
so this weekend my son and i will try the z hose thing.But if any other clues plz let me know.
|This thread has more than 10 replies. Click here to review the whole thread.|