|04-22-2007 06:36 PM|
|2nd_to_none||well i started at 25 psi couldnt get that good of grip so i went to 20 psi and ran some 16.0 (which is bad) and still couldnt grip so well..... i thought about going to 15 cuz some other guys did and it worked well for them but i didnt... i need to drop that puppy a little bit cuz i just couldnt get any bite. i tried launching at 3k rpms 2k, and no reving and still would spin so back to square 1|
|04-20-2007 06:33 PM|
20-25psi agreed ^^^^
Then try 16-18 and compare your 60 against 20-25 range.
You never want to start that low you want to work your way that low until you find the right pressure. Goodluck.
|04-20-2007 04:45 PM|
thats too low....
id say ur at 40 which is already pretty high...
bring it down to 25 and ur cool...
that should get u off the line alot better
and create less drag down the track
|04-20-2007 04:42 PM|
|Buickboy||Try dropping it and do a run, couldnt hurt. Hope you get enough runs to play with launching/ tire pressure combos. let us know how it goes|
|04-20-2007 04:31 PM|
|Duffman355||that would probably work.|
|04-20-2007 03:47 PM|
drag racing tomorrow
Well im racing in the morning and have everything tuned and ready to go BUT i dont know how low to go with the tire pressure.... i have 215-45-17s and i want to bring the tire pressure down so i can launch better. i have them set at 40 psi now but i was thinking about bringing them way down to like 15-20 psi, just the front thou leave the rear hard.. what is your opinion?