|10-22-2012 11:43 PM|
|rdaex||Ended up being a bit of a lip at the insertion point (heh heh) that I just dremeled off.|
|10-22-2012 11:19 AM|
copy one of the pictures in the above post or take a picture of what you are asking, not sure. the above how-to illustrates most of it pretty well.
I didnt use a how-to and was able to figure out the install pretty easily. If i follow what you are asking, there was like a washer/locking thing i had to slightly unbend to install the cable and then rebend it back once installed.
|10-21-2012 12:28 PM|
When I go to thread the cable into the new assembly... it wont go in.
The inside of each assembly has 3 right angles, and one like... notch, maybe a 45 degree angle. The cable seems to be made for that, but damned if I can get it to go on.
Is it as simple as PUSH REALLY FARKIN HARD, or am I missing something?
|03-25-2012 02:31 PM|
|whimsicalpouch2||this is very helpful, since my leather was torn and i ended up tearing it off awhile back, now that my ebrake cable to my right rear tire is broken, might aswell fix it all at once, aswell as my other brake stuff i'm doing, my car will be all braked out haha|
|03-26-2008 12:04 PM|
|S2||Added to the 'How To Archive'....|
|03-25-2008 11:05 AM|
|CaysE||I'm saying he should be able to attach the pics to his post rather than link them.|
|03-25-2008 10:45 AM|
with the amount of How-To's that have been posted lately, im not suggesting that. i have submitted 5 to chad this month alone.
|03-25-2008 10:13 AM|
Just attach the pics instead of linking.
I found it easier to pop the ebrake boot out of the center console first and removing the nut on the ebrake cable; this way the ebrake handle could point straight up, allowing you to more easily get the console around it when you pull it off.
|03-24-2008 11:07 PM|
ok, this How-To is much better detailed than our current one. consider it stickied.
Chad will prolly be replacing the current with this one.
oh and btw, FF.com nor I condone drinking alcoholic beverages while modding your FoFo. it just isnt a good idea. besides....Corona
checkmyvitals...please, please do not allow the pics in this How-To to be broken. so if you ever move these pics, make sure you update the links here. if you arent able by then (if its been too long), let me know so i can.
|03-24-2008 09:39 PM|
|loudfocus01||A important tip for anyone doing this is don't pull out the old cable....use it instead of the one that comes with the svt ebrake handle. I pulled out the old cable, and had to freakin hook it back up from under the car since the part it hooked up to was way deep down in the hole. I had to move part of the heat shield out of the way.....such a big PITA that was. I got it installed now finally, and it looks great.|
|This thread has more than 10 replies. Click here to review the whole thread.|