|07-04-2006 11:24 AM|
|bigjordan||i just changed the bulbs on my 2000 and it took about 5 minutes (and no ratcheting)|
|07-04-2006 10:08 AM|
|07-03-2006 07:05 PM|
Well, Ford must have realized this and fixed it since 2001 as the instructions for the 2005 models is rather simple:
Replacing license plate lamp bulbs:
1. Make sure the headlamp control
is in the OFF position.
2. Insert a flathead screwdriver in
the recess and pry out the complete
3. Pull the bulb straight out.
(From the 2005 Owners Manual)
|07-03-2006 03:44 PM|
Replacing License plate lights (zx3)
in proccess of doing this, anyone who has done this knows this is 10x as complicated as it should be!!! plus it's a dirt collection area right behind the emblem and plastic molding, this is like an hour long job! just warning people if they want to replace a bulb to have nice ratchet set handy and cleaning supplies