|03-13-2006 06:27 PM|
|netdrgoon||I disagree on not letting any pressure out with the stock tires. 32psi will not work for me at the track on street tires. The fastest time I have run thus far was around 25-26psi, and that helped remove a good deal of wheel spin.|
|03-12-2006 03:09 PM|
|HaveBlue83||^thanks, i will just have to try it again later......and again and again and again......|
|03-12-2006 02:54 PM|
|CMEmach1||I would agree with coleslaststand. I think you did just fine for your first time at the track. Believe me nobody is John Force their first time down 1/4 mi.. The important thing is to start with the baseline you established and try to learn and make improvements as you get more experience and imput from others. I don't know about the Focus SVT engine but my Mach1 motor doesn't like the high temps or high humidity. The track prep can also make a big difference. Remember you should only compare times when it's the same weather and track conditions. There are a lot of people out there that never say anything about the bad time slips.....and everyone gets a slow time every now and then. Keep trying and try to find what works for your car and you. Set realistic goals with the conditions of the day and then drive the heck out of it.|
|03-11-2006 01:23 PM|
|coleslaststand||His times weren't that bad considering that he is an amateur with only one mod that would benefit him in the quarter ...|
|03-08-2006 10:58 AM|
|TwighlightBlueZx5||yea work on feathering the clutch out with a little higher prms as you do, much more effective launch...|
|03-08-2006 10:29 AM|
oh, I know they suck......I am just afraid of breaking my car.....I DON"T need to destroyu something on my car 100+ miles away from the base.....THAT would NOT be good........
I will just let the clutch out smoothly, and not just let it go as much, or as quick, next time.....
|03-07-2006 08:44 PM|
work on your 60ft.
those times honestly suck for an svt but nobody is perfect, just practice till you get the hang of it.
|03-07-2006 05:36 PM|
|03-07-2006 05:01 PM|
|2.0TooSlow||Keywords being Drag Radials. Slicks and Drag Radials you can, street tires no.|
|03-07-2006 03:50 PM|
yeah, like 10PSI lower than normal i guess....
My dad always lowers his tire press. in the stang....to like 12 or 18 in the rear for Drag radials.....
and lowering PSI helps to lessen tire spin.......
|This thread has more than 10 replies. Click here to review the whole thread.|