|11-20-2014 06:10 PM|
|Slicknick||Only the driver side resister is getting hot. Is that normal. I get the error but no flickering now.|
|11-20-2014 05:05 PM|
|Slicknick||Can't get it to work. Have it all hooked up. Flickers and db error. Works fine when the car is off.|
|11-09-2014 11:54 PM|
|Slicknick||That is what I bought, my hid kit should be here this week.|
|11-09-2014 11:11 PM|
|VivaLaAnt||Alright So I Have My 55watt HID Kit 8000k, I Have A US Model With No DRLs, So I Still Need 1 Relay Harness And 2 Resistors Right?|
|10-27-2014 06:57 PM|
|KibaWolf||no. if you check my whole write up, there a wiring diagram, youll see the passenger side only need to be plugged in the resistance, the relay harness only has 1 input(plugged in the driver side headlight harness and 2 output (for both balasts)|
|10-27-2014 09:15 AM|
Great write up, thanks. Got a quick question.
Do both sides (drivers and pssenger) of the original headlight bulb harness need to be plugged into the new HID harness?
|06-17-2014 04:26 AM|
|N1TRO||One type- for HID, other type for halogen lamps. more expensive set- better light beam on road..|
|05-07-2014 11:23 AM|
http://www.ebay.com/itm/2012-14-Focu...17678852&rt=nc and these:http://www.ebay.com/itm/291110611196...%3AMEBIDX%3AIT
Which ones look the best on our cars, any opinions? I think these would be my favorite if the DRL strip worked as a turn signal indicator as well as a DRL.
|05-07-2014 10:10 AM|
|05-07-2014 05:52 AM|
|N1TRO||May be in summer) I havnt yet info about this last design))|
|This thread has more than 10 replies. Click here to review the whole thread.|