|12-08-2013 02:16 PM|
can you tell me where you get those bushes from?
I'll send you a pm bout the headlights
|12-08-2013 09:49 AM|
|12-06-2013 07:06 PM|
yeah that Tstat housing is tits what can you do shipped on a new set of ST170 with back plates and signal sockets, Ive been talking to a guy in Germany but he hasn't been real clear and kind of hard to get a hold of.
Thanks for the kind words, and hit me up on those headlamps please my stone ones are all crusty and yellow now with internal cracks throughout the plastic.
|12-02-2013 10:33 PM|
|Spitfire22||wow, so many talented people at focus fanatics, which i had more knowledge with the tools, very nice work, such a clean and organized looking engine bay, very nice ride|
|12-02-2013 02:49 PM|
Wow i just read the whole thread. You've done an awesome job so far buddy.
Great build. I like the red/black theme you got going on there.
Maybe i can help you with some lhd st170 headlamps since i'm from Holland.
I also like the t stathousing. What a nice piece of aloy.
Can you tell me the use of the nerd shift bushes? I've never seen them before.
Are you not afraid of increased wearing on the big end bearings due to the aloy distribution pully's??
I thought i would get them to but i'm afraid it will eat my big end bearings becouse the oem crankpully is balanced and the aloy ones are not.
|12-02-2013 10:34 AM|
Did oil change and put the VC i got from Starfury on still need to do the Ver2 Massive camber arms my pass rear wheel is @ -4 degree camber
|10-14-2013 10:33 AM|
Put in the NERP solid shift bushings... WOW! what a difference. If you look closely you can also see the wiring being ran for independent turns for Euro Tails but ill post pics of those when they are done and I also have a few more updates.
|08-12-2013 11:21 PM|
Another quick update popped out the rear camber a little more & lubed up the threads so they wont seize up again and will take it to Firestone in the morning ( aiming for -0.5 in the rear) what is a safe camber up front...... Driver front is at -1.9 and Passenger front is -1.4
I think im going to have to warranty these MOOG balljoints
Changed oil drained water and flushed radiator and put in green coolant. I also changed the fuel filter.
and these I know one side is a little higher but I had 4 decals to begin with and I jacked up 2 of them
|08-05-2013 09:35 PM|
|GreySkorpion||The rear could come down just a hair, I like them perfectly level|
|08-05-2013 09:17 PM|
|Blue5ive||Appreciate the feedback and offer. 1.5" is a good enough drop for me. Probably won't be until spring when I change over so I may get the chance to try your setup :)|
|This thread has more than 10 replies. Click here to review the whole thread.|