|01-24-2013 01:53 AM|
|sleepyboy||Did you put the thick part on the bottom or top? Not that I'm saying you don't know how to install it or anything just curious cause the first time I put it in I had it upside down and backwards. Also your not supposed to use any lube to put them in.|
|01-24-2013 01:50 AM|
|amc49||That lip did nothing whatsoever to stop the ES insert from squeezing itself out on mine. It also vibrated much more, my first and final experience with urethane mounts..............|
|01-24-2013 01:05 AM|
|sleepyboy||The ES mount has a lip on it to keep the mount from slipping out of the dog bone. I've also had a new Prothane mount split on me before which caused some damage to my car. Now I have a leaking PS rack and a bent exhaust. Though the exhaust was a tad too close to my PS rack to begin with but when the mount gave it whacked it good. I've had the ES mount last years before failing. Poly mounts do wear out they just take a lot longer to do it. Oh and the other Prothane mount I had is slipping out the mount. You can order the ES mount directly from ES for less than 25 bucks shipped. I have pics but can't post them due to my work internet.|
|01-24-2013 12:39 AM|
|xxMichaelAnthony||I always hear Energy over Prothane. Why? Different compound? Firmer? Softer?|
|01-23-2013 11:34 PM|
|sleepyboy||I poly the lower one and leave the top ones. On a stock engine the vibes can be a bit annoying. I'd also recommend the Energy Suspension inserts over the Prothane ones.|
|01-23-2013 11:23 PM|
|01-23-2013 11:19 PM|
|sleepyboy||When replacing one it's best to replace them all.|
|01-23-2013 11:11 PM|
Aftermarket mounts will use like one rubber compound on everything they make and it will be hard as rock. Factory will often use different rubber compounds based on what engineering has shown to be the proper amount of damping for particular engine/chassis combinations. On the hydraulic mounts the aftermarket will be made very much shoddier with some new ones coming apart in weeks or days...............
Oh, and a lifetime warranty on those particular parts really means absolutely nothing, they are made so cheaply they actually plan on you coming back to get replacements which will fare no better. BTDT several times.
|01-23-2013 10:00 PM|
You probably need to do the passenger mount and the dog bone
There seems to a majority consensus (although there is one that says the no name mounts work) that the passenger side needs to be FORD OEM .
|01-23-2013 09:45 PM|
|pasta||factory way to go tousleyford.com|
|This thread has more than 10 replies. Click here to review the whole thread.|