|01-22-2013 11:08 AM|
|qweesy||cool man thank you and the bulbs in the euro tails look like 1156 for turn and 1157 for running/brakes is this correct|
|01-20-2013 07:47 PM|
|katiekay||Yes, that is another good thread. The diagram you posted is what you need to do for the GEM, you will still have to pull the D/S hatch carpet off to re-wire that also.|
|01-20-2013 07:43 PM|
^^^ Thank you Pyro.... running 2 wires all the way back is a bitch...
what about this? I will be soldering no bs scotch locks
|01-20-2013 05:44 PM|
You are still going to have to re-wire your car. Simply adding Euro pigtails will not solve the separate turns. Only way to separate the turns is to re-wire your GCM. Best how-to is this one:
That is how I did mine:)
If you use the how-to I posted, your hazard switch will work correctly as well.
|01-20-2013 11:08 AM|
Hatch Euro tails wiring question I have bulb sockets and pigtail harness
1. I have the bulb holders and the harness that goes to the bulbs do I still have to do the wiring deal under the glove box or can I cut off my plug from the US spec tails and wire it up to the Euro tails harness and just leave the Reverse wire un plugged?
I don't want to run a bunch of wire through the hatch I want it as factory as possible, preferably plug and play.
2. Will the hazard switch work correctly after this mod? "only orange flashing out back"
3. Ive found like 5 different how to's???? which is the best one to use