|12-27-2012 09:57 AM|
|2008 Ford Focus||Too bad. Dream deal.|
|12-26-2012 08:35 PM|
|12-26-2012 07:01 PM|
|DarderSauce||That is a great price on an 09 with only 25k miles, it's actually the cheapest MK2 with such low miles that I have seen since I started checking these forums (Feb. 2012). That is of course if there is nothing wrong with it.|
|12-20-2012 05:38 PM|
|2008 Ford Focus||Sure. Check service on it if possible. Not a bad idea to have it inspected at a dealer to see if there are major probs. Of course, you would be paying for this inspection, but it is good to know what you are getting into. I think the 08-11 focus are perfect for what they are, a fun inexpensive car with low maintenance costs. If this 09 with just 25k is just 6k and is good, I think it is a great deal|
|12-20-2012 10:36 AM|
As others have hinted at, why are you wanting a new car? they normally aren't good investments but if you need/want a new car, that sounds like a solid price but as always try to negotiate a better deal
Also, moved this thread to MK2 Focus
DURATEC Performance (2003-2011) is for Duratec 23, 23E, and 20 engine performance, tuning and exhaust related upgrades.
|12-19-2012 07:18 PM|
sorry guys i found an 2009 focus 2 door for 6k with 25k miles is that a good deal?
and if so would my parts fit the 09?
|12-19-2012 02:53 PM|
|avilla61||I'm changing the car just because the intake should fit|
|12-19-2012 12:16 PM|
The exhaust is interchangeable between 00-11 and as far as the Intake u can make a bracket really easy I did install a k&n in my old 08 and the intake was for a 05 iirc
|12-19-2012 10:25 AM|
^^what he said. everything under the focus is pretty much the same (from a certain point in 05-11 i think they change the exhaust area a little to accommodate the square and round mufflers). As for the intake, if it's not fswerks latest version you're going to have to buy a new one. if yo have a steeda that might work, BUT don't quote me on that one, the heat shields are different.
guess the question is what intake do you have?
|12-18-2012 11:13 PM|
|crice8||The exhaust should transfer right over from what I remember reading on here. The intake I think is specific to gen but I could be wrong. Hope this helps!|
|This thread has more than 10 replies. Click here to review the whole thread.|