|12-04-2012 05:43 AM|
|GreySkorpion||Got it, thanks! For some reason I hooked my blue amp wire to the pcm, I have no idea why, what a dumb ass I am.....|
|12-04-2012 01:15 AM|
|GreySkorpion||Okay I see it now. I will report back in the morning, thanks!|
|12-04-2012 01:10 AM|
I'm saying you may have mixed up the og/bk and bk/og.
I can see that disabling CC.
|12-03-2012 11:27 PM|
|GreySkorpion||I have a blaupunkt if it matters. So you are saying to hook the orange/black to my current yellow connection instead? I know I didn't hook up the orange/black because my diagram says it illumination and the Pioneer doesn't call for it to be hooked up.|
|12-03-2012 10:20 PM|
Just checking the wire diagram.
Don't know why I was thinking yellow ...
Notice the Orange/Black and Black Orange?
|12-03-2012 09:51 PM|
|GreySkorpion||So look for the other wire to use? I am at work and will take it apart about 8:00 am tomorrow morning. I can't recall what other car wires weren't used, I know the illumination one was not, it does seem like there was another wire.|
|12-03-2012 09:38 PM|
|iminhell||Wrong yellow wire from the car side ...|
|12-03-2012 09:20 PM|
Strangest electrical problem ever???
So I hooked up my Pioneer head unit by hard wiring it. I hooked up the ground, constant and acc wires according to my Haynes manual. The only wire on the radio harness not used was the amp/power antenna relay wire and the only wire from the cars harness not used was the illumination wire. Now my cruise control only will work when the stereo is off. What did I do wrong?