|11-15-2012 08:46 PM|
Well I finally got my rear dome light installed and with the LEDs in it. Took some custom wiring and some on the spot problem solving but I did finally get it done.
Also did the rear license plate lights in pure white LEDs too.
Out with the old and in with the new
All my LEDs on, including the foot wells and under the dash
IPhone does not like that color
Bright light is bright
My back seat now leaves the darkness
|11-11-2012 07:32 PM|
|VonKrause||Got the 1st gen lamp and it doesn't quite fit properly, so there is that, I cut a couple tabs off and it wedged in pretty good, I am thinking some hot glue is in my future. Also the plugs ARE different, so if you get a headliner out of a parts car BE SURE TO GET THE WIRING! I plan on soldering and custom attaching mine up since the wire harness can't seem to be found. Also the lamp that I got has map lights AND the center light so I don't think it's the one for that spot but since it "fits" I am going to run with it. Pics once the LEDs come in.|
|11-08-2012 09:15 AM|
|VonKrause||Haven't had time to go hunting, by the time I am off work the sun is already gone and I am usually pretty hungry by then. Besides I should have a shiny new one today.|
|11-07-2012 02:39 PM|
|Miller88||What about a junkyard? I'm sure there's plenty of first generation with their fronts still installed ...|
|11-07-2012 12:51 PM|
|VonKrause||Still waiting on the second one to come in, had to order it since no one in Houston has it. Should know tomorrow, also not sure yet if it is same bulbs for sure but will know soon.|
|11-07-2012 11:21 AM|
Now for the big question.... Is the wiring Plug N Play?
|11-07-2012 11:17 AM|
|11-06-2012 01:56 PM|
but the wedge type for the rear is the same as the fronts. what i was saying is that you should get a brighter one in the back. my bad, i was half asleep.
|11-06-2012 01:37 PM|
Install wasn't too hard, take it out through the front doors, it's easier. You will have to replace the hooks for hangers though since they are destroyed in the process of taking them out.
|11-06-2012 11:57 AM|
|This thread has more than 10 replies. Click here to review the whole thread.|