|10-28-2012 06:16 PM|
Yea we tested it out.
And for reference this is what under the passenger side looks like.
|10-28-2012 06:13 PM|
Looks like you got 'em wired, working OK?
With BC's description to go by, the Focus runs the stock one on a relay already - So I'd just hook the new ones to the existing wiring instead of putting ANOTHER relay in the circuit.
|10-28-2012 05:29 PM|
|WEMKAY||One under the headlight, the other in the old spot. I might move the lower one over to the other side sometime but it doesn't seem to have the same easy spot to mount.|
|10-28-2012 05:27 PM|
|10-27-2012 05:03 PM|
|WEMKAY||Ok, that made sense at the time. Now I'm lost. However they are mounted. One where the old one was,the other in the space under the driver side headlights.|
|10-26-2012 06:21 AM|
|10-25-2012 10:33 PM|
The top pic is similar to how the Focus is wired.
The horn relay is supplied with a constant voltage from the Battery Junction Box (BJB) - fuse 32 20A - and the horn receives voltage from the switched side of the relay. The relay switch is controlled on its ground side by the steering wheel switch.
|10-25-2012 06:52 AM|
|WEMKAY||So like the top picture|
|10-25-2012 06:51 AM|
|10-24-2012 01:13 PM|
|xxMichaelAnthony||I connected mine to the battery and used the stock wires to signal the relay that came with them.|
|This thread has more than 10 replies. Click here to review the whole thread.|