|05-09-2012 11:19 PM|
|Todd TCE||Interest in full on BBKs seem to be 'somewhat' limited.|
|02-26-2012 01:13 AM|
|FLGSVT||i stopped by to see Todd about a year ago. Super nice guy and knows his stuff. I was the guy that brought a new fiesta in for R&D.|
|02-24-2012 09:58 PM|
I'd be happy to sell you 'line item' parts if you want to do your own thing, that's not a huge problem.
A set of 12.2 brackets (need to check my inventory) will run you $118. That's $59 each and will include the basic mounting bolts, washers and nuts. Can't say what would be required for spacers so you're on your own there.
|02-24-2012 07:27 AM|
Ok. After much frustration, I think I'll just be replacing the calipers. I found how much yours pads and calipers are, but how much are the mounting brackets(plus necessary hardware) for a 12.2" kit for a 05 Focus? I already have the rotors and spacers, and I imagine my SS lines will work on the Wilwood calipers too. If not, I can always order them later.
Oh, I'm looking at the FSL calipers, if that's a factor for a 12.2" set up.
|01-31-2012 08:41 PM|
|Todd TCE||Fair enough. If you can fix it up first for less I fully understand.|
|01-31-2012 08:27 PM|
|ChazimusZX4ST||Might be calling you about a 12.2" kit if I can't fix it.|
|01-31-2012 08:04 PM|
I'll have to pass, sorry. No idea what they are or where to get parts for them so I'd not really be of much help to you.
|01-31-2012 11:26 AM|
|ChazimusZX4ST||Do you repair calipers? My driver side is leaking, but its not Wilwood, its the Jackson Racing kit by Winnerpower. I figured if one is leaking I'd send both to be redone, if you guys are willing to do it. I haven't determined where exactly its leaking from yet, just curious if you offer that service.|
|01-28-2012 12:00 PM|
New Brake Kit refresher post.
Not sure how many 'late model' owners are really out there but the intro pricing offers still stand for the new TCE kits. And I'll include ground UPS on any kit sold from now through the end of February. Saving you a few bucks more.
(ground ups, us only)
|12-23-2011 09:52 PM|
They use a bigger tapered ball joint
|This thread has more than 10 replies. Click here to review the whole thread.|