|Car Audio, SYNC, MyFord Touch & Electronics The Forum for the Ford Focus audiophiles. The place to chat about automobile sound systems, security systems, or show off your I.C.E.!
Sponsored By: GT Sound Control
|Topic Review (Newest First)|
|12-03-2013 05:35 PM|
|foxmustangman||Yeah super easy, just make sure you have the wiring harness and the kit to fit the dashboard, you'll have to order it online because nobody locally carries them.|
|11-20-2013 09:20 PM|
|myles56||Thanks for relying Was it easy to do|
|11-20-2013 02:44 PM|
|11-20-2013 03:08 AM|
Has any one tried to put a kenwood DPX500BT by chance
|11-03-2013 11:17 AM|
There are adaptors on crurchfield that will allow you to use your steering wheel controls with any headunit
Sent from my ADR6425LVW using FF Mobile
|11-03-2013 11:15 AM|
unless you hook up the controls or the head unit identifies that it can work with steering wheel controls it likely will not work. there are some that do, and there are some that dont.
What aftermarket head unit do you have?
|11-03-2013 10:54 AM|
|Dshaw1984||Ive got steering wheel controls how is this affected??|
|08-25-2013 04:42 PM|
|foxmustangman||So here's my issue...I installed a double din stereo in my 03 ZX3, and when I did so I just slid the stereo into the bezel and locked it into place. I never took the 4 screws out from the back of the bezel, is there anyway that I can possibly get my stereo out of my car now?|
|04-28-2012 10:08 AM|
|SvviftSVT||I unscrewed mine. Couldn't get it any other way. Not saying there isn't one, I just couldn't.|
|04-28-2012 04:30 AM|
Have just joined. First of all, thanks to everyone in this thread for the useful information, has been very helpful. Trying to install a double din head unit at the moment, and have bought a replacement bezel designed for it.
Possibly a stupid question, but can someone please tell me how to disconnect the heater/fan control plugs? There is so little slack in the wiring I can barely even turn it over to see the back of it, and from the pics at the start of the thread it looks like they can be easily disconnected.
Do I need to undo any of the screws on the back of it, or is it just a matter of trying to push/pull whatever little clips are on the plug and pull the hell out of it?
Already wasted an hour swapping the ciggy/power socket over onto the new bezel so hoping this job will be a bit easier :)
|This thread has more than 10 replies. Click here to review the whole thread.|