|Car Audio, SYNC, MyFord Touch & Electronics The Forum for the Ford Focus audiophiles. The place to chat about automobile sound systems, security systems, or show off your I.C.E.!
Sponsored By: GT Sound Control
|Topic Review (Newest First)|
|09-15-2014 11:18 AM|
Excellent write up
|09-15-2014 11:12 AM|
Kenwood DDX271 - Double Din
Thanks to Deener for being the pioneer on this install. The install was easy using his method. I am thinking of using the bezel's screw tabs to help hold the radio in place through the use of fabricated brackets. Does anyone have any thoughts on this since it will necessitate the removal of the screw holes in the dash maybe. I guess I won't really know if I have proper clearance until I actually try to install it.
Any other thoughts on fixing the radio into position would also be appreciated. Or is it even needed?
|06-07-2014 10:52 AM|
|Snelski||Awesome, looks great and congrats on getting it done right.|
|06-07-2014 10:18 AM|
Install JVC DD in 04 ZX3
Thanks for all the advice. I used a Dremel to cut the top edge of the opening in the bezel and to remove the tab on the top left side. Overall I am very pleased with the result.
|05-18-2014 04:39 AM|
Its a cool feature IMO i dont knwo how many times ive been jamming my system with the windows down doing 75 on the freeway and your ears tend to sort of start ringing from all the wind noise then you stop and go inside some where and come back out start your car AND THE RADIO IS BLASTING AND YOUR LIKE WTF HOW COULD I BE LISTING THAT LOUD!?!?!
Your ears readjust to the quiet and then you get back in yoru car and its WAY loud! That auto volume would be nice with a better radio.
|05-16-2014 11:13 PM|
Now to chop up my bezel. Wish me luck!
|05-16-2014 11:11 PM|
|BowerR64||One is for speakers and power, one is for an external amp, one is for controling the volume when the car speeds up and down if im not mistaken.|
|05-16-2014 10:33 PM|
I just bought myself a Double DIN JVC from Crutchfield for my 02 ZX3. No warnings that I'd have to cut anything...
Got it all wired up this AM (BEFORE doing my research!) and went to put it in the dash and
No dice. There's a lip just inside the bezel that's preventing me from sliding the radio in. Grrr.
So now I get to hack on my 'new-to-me' Focus. Aaah well. Replacement bezels are cheap if I hose it up.
...but that leads to another question: There were 3 plugs in the back of my stock radio. The smallest has one white/green wire in it. What's that for?
|05-02-2014 05:24 AM|
JVC KW-HDR81BT in a 2004 ZX3
Has anyone installed a JVC model KW-HDR81BT, double DIN in a 2004 ZX3? Crutchfield swears it will fit with a rear install, but no matter how I approach it, I can not get a flush or even near flush fit. Before I start trimming the bezel and forgetting about using the 4 screws to hold the bezel in place, I need to know if I am making this way too complicated.
Thanks for all the other posts. It is reassuring to know that this is a common problem.
|04-17-2014 12:25 PM|
Thanks for the excellent pics and instructions...
Just wanted to say thanks for this thread - I completed my Double DIN install with a Clarion CX501 and also wrapped my bezel with silver Carbon Fiber look vinyl, which came out fantastic. With the help of this thread in particular, thanks again
|This thread has more than 10 replies. Click here to review the whole thread.|