|11-02-2009 07:55 PM|
|03OrangeSVT||Check the timing table for WOT w/IRMC open|
|11-02-2009 07:34 PM|
|FordManSVT||I was at the dyno again today. Set the J&S to individual cylinder mode. Sensetivity to just under half way. Also turned off the knock sensor. And it doesnt seem to be as bad. But it still drops timing. Just for S&G we made a pull with the J&S unplugged and the car still acts up. It seems to happen when the IMRC changes, but I we cant see how that will make the car drop timing.|
|11-01-2009 09:31 PM|
|FordManSVT||Yeah, gotto love the comp orange, and boost is going to be great.|
|11-01-2009 09:28 PM|
Another turbo Comp Orange.... Sweet.
I'd also go in the tune and set the number of knock sensors to 0..... just in case.
|11-01-2009 08:48 PM|
|FordManSVT||Ok that makes sense with the knock sensor. Is the knock sensor the only thing I need to have turned off? I did have the J&S was set to cut out all 4 culinders. I am going back up to the dyno tomorrow. I have a feeling that the knock sensor and the cut out of all cylinders is my problem. It is a turbo car.|
|11-01-2009 03:16 PM|
When you turn off the knock sensor in the tune all it does is tell teh ECU to ignore its input, thats how the J&S can still use it.
Also with the J&S are you set up to pull timing across all 4 cylinders at once or individual cylinder??
This a SC or turbo car?
|11-01-2009 02:32 PM|
|FordManSVT||He is using SCT. I dont thing that it is the runner change. To me that should not affect timing like that. I dont thing the knock sensor is turned off. So the know sensor is turned off but the J&S still reads off the wiring? I will be going up tomorrow afternoon when it goes back on the dyno. I will take my laptop and try to post a datalog of the timing problem. I dont have access to it today. I know that the J&S is the thing to have, yesterday i drove it with it plugged in and it really died at 4500-5000 rpm then picked back up. I alson drove it with the J&S unplugged and it was not nearly as bad. (only drove maybe 1/4 mile total, just enough the see that somethings not right). I think we dont have it set up right.|
|10-31-2009 06:49 PM|
|03OrangeSVT||I'd like to see a datalog of it.|
|10-31-2009 06:47 PM|
yeah i dont deny that.
but the fact is its doing something crazy around the rpm of the runner change.
|10-31-2009 06:46 PM|
|03OrangeSVT||^^^ But he also said its adding timing... which tells me knock sensor is still on.|
|This thread has more than 10 replies. Click here to review the whole thread.|