Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - Reply to Topic
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace


Go Back   Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum > Ford Focus First Generation > MK1 Focus > How To: Install Saleen Spoiler

MK1 Focus The place to chat about general questions, window tinting, exterior body, interior and lighting upgrades for the first generation 2000-2007 Focus.

Search This Forum | Image Search | Advanced Search    
Ford Focus Tire & Wheels FocusFanatics Merchandise

Thread: How To: Install Saleen Spoiler Reply to Thread
Title:
  
Message:
Post Icons
You may choose an icon for your message from the following list:
 

Register Now

In order to be able to post messages on the Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
10-07-2008 11:21 AM
zx505focus i just got me a wing but it didnt come with the hardware. I need to find where i can get it. But this help me out alot. Nice write up and i know this thread is old but had help finding it. Thanks
08-21-2004 05:35 PM
mercuryinhell
How To: Install Saleen Spoiler

SALEEN BI-PLANE SPOILER INSTALL BY MERCURYINHELL


More info coming soon! My spoiler is in the shop for paint and should be installed on Tuesday. For now, take a look at the hardware that comes with it (I had to call and get them to ship mine, they forgot it*lol*).

Here is the whole kit and
a check list for you:
1X LED Light Bar
2X Plastic red hole covers for light bar
1X Black metal wire holder
8X Nuts and bolts
20x Washers
4X Little Bolts
2x Screws for light bar
1x RH Upper Bracket #8135
1x RH Lower Bracket #8136
1x LH Upper Bracket #8009
1x LH Lower Bracket #8010
1x Double faced adhesive tape roll


Close up view of the brackets so you can get some idea of how it works.


The spoiler itself consists of 4 parts, 5 if you count the light bar.
The top wing and sides are permanently together, so if you wanted the second plane could be optional (but that would be silly). On the side there are 2 insert pieces, which I am not sure how to install, but I think the adhesive tape might be the answer. The light bar mounts up fairly easily and taps into your third brake light. The third brake light does not need to be removed, and can be easily tapped into at the underside of the hatch. Simply splice the 2 wires onto the led bars 2 wires and you are done. I suggest test fitting the spoiler to see that it will fit correctly before you goto paint it.

After that, this is how I plan to mount the spoiler.

1 -Get the spoiler back from paint
2 -Attach the LED bar using the 2 screws supplied. (I don't know wheter to use the wire that is in the spoiler ans splice in, or run the very long one attached to the light bar at this time. That will be a decision you will need to make.)
3 -Take all 4 brackets and place them on the hatch in the general area where the spoiler will mount. The labels on the brackets are self-explainatory. Get them adjusted so that the holes on the inside of the main spoiler line up with the holes on the brackets.
4 -Attach the main spoiler to the brackets using 4 of the large bolts included. I suggest putting a washer on the bolts before you put it into the spoiler. Do not overtighten because it can damage the fiberglass.
5 -Line up the spoiler so it is where you want it and that it is level on the window. Hold the spoiler in place and drill your holes on the inside of the hatch. Insert the other 4 bolts to the inside in the hatch, through the brackets.
6 -Close hatch.
7 -Line up secondary spoiler in between the main arms of the main spoiler. Make sure it is facing the right way. Line up the holes on the secondary wing with the holes in the indentations on the side of the main spoiler. Use the 4 small bolts supplied to mount the secondary to the main spoiler.
8 -Use the supplied adhesive tape to secure the side panels. I suggest running a piece the whole way around the inside where the corner is. That way you get some on the top and the side. This will ensure a good fit you won't have to worry about.
9 -Attach your brake light wire to the LED light bar by running the wire up to where the rubber boot is for the hatch. The boot should easily come off. Splice your 2 wires from the LED to the 2 from the brake light. Make sure to match up your colors. Black goes to I think it is green/black. Red goes to red.
10 -I suggest using some super glue or epoxy to mount the little red circles to the LED bar. There is no real way to hold them in there. You could try using your adhesive tape, but I think I will go superglue. It is more reliable.
11 -Step back and take a look at your new spoiler.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -5. The time now is 04:31 AM.


Copyright 2002-2014 FocusFanatics.com. All Rights Reserved : Privacy Policy : Advertise Information

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Audi S3, Ford Fusion and Acura TLX. You can find all Ford Focus and Focus ST related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area. Challenger Hellcat - Charger Hellcat