|01-08-2013 12:26 PM|
|Red01Focus||yeah he has not been on since 2010 doubt you will get your pics but what did you want to see again?|
|01-06-2013 12:45 AM|
|08-23-2008 06:03 PM|
|08-17-2008 08:16 PM|
|joshfink||errr uhmmm I forgot to take a picture! I will I swear! uhhh I dunno when lol. Probably right before the new one goes on the car... I got a few things that need painting that day.... Obviously the bumper but also gonna do my mirrors too... (sand the mirrors first) and not gonna rattlecan it all either! should look awesome.|
|08-17-2008 12:33 PM|
^^^Alot of people feel your pain.
I am working on a set if i can get a set of 05-07. Should be a fun little project.
|08-17-2008 12:23 PM|
|NickDaBear||the gaps what i want to see.....will they not fit at all with the 07 lid??? I just dont personaly see the point in buying an 07 and Retro fitting the front or back or what ever...not knocking you at all!!! i just would like a Dagon set of Tails!!!! lol|
|08-17-2008 12:18 PM|
|08-17-2008 12:16 PM|
|08-17-2008 12:15 PM|
Theres a lot of work that is involved.. well not a lot but here is what we did.
First, remove the 07 trunk lid, remove everything from in there. cut the wires near the hinge for the lid.
Removed the tail lights...
(would have removed the bumper but the new one is not here yet)
The striker should be removed and replaced with an older style striker for the trunk lid more on this...
ok As for rewiring... it was NOT hard at all. We bolted the older style lid onto the car and just tested which wires went where. They pretty much matched up, but the older style lid also used heavier gauge wire too for the latch and the third brake light and license plate lights. There is also the wires that tell the car whether or not the trunk id open... the lid I got did not have those, so we simple soldered them together so trick the car into thinking it was closed although I guess if you wanted to you could jury rig something up so keep that functionality but really... who doesn't know if their trunk is open, and not only that if you are driving is stays closed anyway lol.
Tail lights was easy. However you most likely will not be able to use the stock brake/turn signal light bulb socket as its bigger. I had a wiring harness for the rear of an 03 handy so we wired in those sockets... the blue/green wire is also your turn/brake light. There is a just brake light in the harness on the driver side in the trunk if you want to wire that too.
Now for the striker... I didn't have one handy... so we kinda cut part of the protecting mental around the latch on the new lid off. It works for now but I gotta slam the thing shut until I get a new striker
The bumper from an 04 to an 05-07 is different so you will need a new one I am just waiting on mine.
I would also recommend buffing the hell out of your new lid... since its older than the car.
As far as fitment for a spoiler from my 07 to this 03 lid... It fits ok... But I am going to fit in the gaps with silicone since the new lid is slightly more curved and the lid that came with the car was flat.
Your lock tumbler from your 05-07 lid will not work in the older style lid unless you can find yourself a nice 04 trunk lid... But you can have a tumbler redone to work with your stock key.
Any other questions at all?
|08-17-2008 12:13 PM|
|NickDaBear||what if you cut and seal the Enlongated "Swoop" On the older tails?|
|This thread has more than 10 replies. Click here to review the whole thread.|