|04-25-2008 10:53 PM|
|BlkMamba03||It is one bolt.|
|04-22-2008 09:21 PM|
So Weeasp, did you go with a strap or metal hook?
Blmamba, is there more than one bolt holding that engine hook?
|04-07-2008 04:13 PM|
|Schroeder02||That’s the same place I mounted my straps,|
|04-06-2008 12:56 PM|
|BlkMamba03||This is a engine hoist off of a Ford truck. Please let me know if this mounting point is not acceptable|
|04-04-2008 11:06 AM|
|Schroeder02||I used the Safequip straps one mine (the car in egz) photo. For the rear I just ran a bolt with some heavy washers though one of the open holes where the bumper bar mounts. One the front I haven’t quit finalized the location. Right not is hooked to where the radiator attaches to the frame, it’s not the best spot but it did work I had to tow it home last Sunday then I had a short and blew a fuse. I’m going to find a spot on the frame to attach it maybe the tie down points the use for shipping|
|03-26-2008 07:13 AM|
This is what we use on our cars http://www.safequipracingproducts.com/racecaracc.htm
We weld a tab on the front and rear then bolt the tow strap and cut a slot in the rubber bumper.
|03-25-2008 04:23 PM|
Did Brian attach his to the bumper itself through the foam or somewhere else?
|03-24-2008 10:08 PM|
|03-24-2008 09:31 PM|
Here is what Brian did.
|03-24-2008 07:25 PM|
heres a pic from an IMSA GT3 for anyone who's confused
I would say weld something to the bottom of the bumper like where theres no foam to cut away. It should be pretty strong there (its a bumper... lol)
If not then youre gonna have to weld a plate to the frame rail to extend it forward and use that.
|This thread has more than 10 replies. Click here to review the whole thread.|