Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - Reply to Topic
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace

Go Back   Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum > Ford Focus Tech Discussions > Brakes, Suspension & Body Chassis > Clunking rear shock mounts: Solved?

Brakes, Suspension & Body Chassis The place to go for answers on brakes, suspension, camber, alignment and more.

Search This Forum | Image Search | Advanced Search    
FocusFest FocusFanatics Merchandise

Thread: Clunking rear shock mounts: Solved? Reply to Thread
Send Trackbacks to (Separate multiple URLs with spaces) :
Post Icons
You may choose an icon for your message from the following list:

Register Now

In order to be able to post messages on the Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
What I Drive
Year, color, and model of your car. Example: 2003 Pitch Black ZX3
Your real name.
Please select your insurance company (Optional)


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Additional Options
Miscellaneous Options

Topic Review (Newest First)
Yesterday 09:51 AM
felixthecat Last time I replaced the rear shocks, I removed the ford oem top shock mount & just used the rubber bushings & washers. IDK why ford did that for.
Yesterday 07:47 AM
What to do with these

"What to do with these."
"Looking to replace rear shock mounts. I don't know what the washer looking parts are for and where do they go?"

I have the same question after installing a rear shock on my 2006 ZX4. I installed new mounting kit which already had a white shim atop lower shock mount. I installed it that way, but had problems with the shock rod with upper mount lifting from where its supposed to rest on car body. I researched on internet and couldn't find any diagrams showing the assembly order in relation to vehicle placement. I now believe that the white washer is intended to be placed atop lower mount AFTER it is attached below car body. I'm going to try placing the white washer over end of shock rod where it comes through shock mounting hole in trunk and fit it over protruding lower mount 4 tabs. I'll chime in with the out come.
04-30-2013 09:47 PM
What are all these

Looking to replace rear shock mounts. I don't know what the washer looking parts are for and where do they go?

11-17-2012 12:15 AM
Sniper Focus I have nylon washers in the mounts and it makes the "cracking plastic" sounds, all this time I thought it was the plastic tote I keep in the trunk to partition/isolate stuff.

I might play around with removing the washers and torquing the nut to 13ft lbs with a crowfoot socket at a 90* angle. The latex washers look like a great idea, but I don't know if I could find something like that.
11-16-2012 10:27 AM
Geezer The upper mounts between the wagon and the sedan/hatchback are very different as are the torque settings for each. After replacing my shocks on my ZX3 I developed a clunking problem as well. After pulling out my hair for several days (and I don't have that much to pull), I discovered that the interior panel (that has to be removed to get to the top mount) was the culprit. One of the clips on the back of the panel was not fastening correctly and was allowing the panel to bang around.
11-16-2012 01:12 AM
Originally Posted by S0C0nFused View Post
Here is a pic of the top of the rear shocks. You can just see the stop.
Also, a pic of the 'doughnuts' I made from a heavy rubber foam. These add considerable resistance to the stock rubber mount (also pictured, doughnuts fit inside). Hope to get them in this weekend. Note: These are not solid like the ones from P-51.
I made a pair of donuts out of 1/4" thick latex sheet stock, they remove all free-play but have a little bit of give under stress.

No clunks ever, it's been 15,000 miles since I put them in.
11-16-2012 12:44 AM
ldwinslow On my 06 wagon I recently replaced the rear shocks and after three days I starting getting a clunking noise on even slight bumps. After talking with a tech rep. from Gabriel I had not torqued the shock bolts properly. I retorqued the bolts per the tech's spec of 85 ft/lbs on the upper and 76 on the lower and the clunking noise went away when driving over bumps. Apparently the shock mounting brackets are meant to tighten onto the shock sleeves. This eliminates the clunking between the mounting bolts and the sleeves when the sleeves are not held firmly by the mounting brackets. When removing the mounting bolts I thought they felt awful tight.
05-22-2010 11:48 AM
Originally Posted by oddballmazda View Post
Can the clunking issue be solved the same way in a 2002 se sedan?
Let's hope so.
I'm going out to buy shocks now and armed with the 13 foot pound number I plan to make my 2000 SE ride like a Bentley.
04-12-2010 07:26 PM
oddballmazda Can the clunking issue be solved the same way in a 2002 se sedan?
10-28-2009 04:32 PM
Geezer The rule of thumb is to compress the bushings (stock rubber ones) so that they are no bigger in diameter than the above and below washers (stick out much beyond the diameter of the washer). For a urethane bushing this would be way too tight as they don't compress much unlike rubber. For urethane I'd just go hand snug (slight compression) on the upper nut unless the bushing installation instructions say otherwise. In either case, the goal is to not bind up the bushings.
This thread has more than 10 replies. Click here to review the whole thread.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 06:25 AM.

Copyright 2002-2015 All Rights Reserved : Privacy Policy : Advertise Information

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Mazda CX-3, Audi S3, Mazda MX-5 Miata and Acura TLX. You can find all Ford Focus, Focus ST and Focus RS related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area. If you own other makes have a look at Challenger Hellcat Forum, Charger Hellcat Forum, Cadillac ATS-V Forum, Cadillac ATS Forum, Cadillac CTS-V Forum, Lexus RC-F Forum, Lexus GS-F Forum, Mercedes GLA Forum, Mercedes GLE Forum, Civic Type-R Forum and Volvo XC90 Forum.


Search Engine Optimization by vBSEO 3.6.1