|02-08-2007 06:01 PM|
|02-08-2007 05:34 PM|
Off topic I know but I noticed osiris_vdc... you and I have ATX's with almost the exact WHP/TRQ (mines 125/126) and almost identical mods but you have FR2's. I was hoping FR2's might get me into the 140 range but maybe not. I may just need to get the head as well.
My apologies for the post jacking...we now return you to your regularly scheduled topic.
|02-08-2007 05:19 PM|
|osiris_vdc||The shifts say firmer, longer. Regular ATX fluid breaks down quicker and the shifting get sloppier, sooner. You should still be in the habbit of changing the fluid on regular intervals though. Stick with the recommended changing interval unless you drive the car hard on a regular basis, then consider changing the fluid more often. I believe the manual states every 30,000 miles.|
|02-08-2007 05:15 PM|
|focus4free||Not sure if it's the placebo effect or not but to me when I switched to full synthetic it did seem to drive/shift much smoother.|
|02-08-2007 05:00 PM|
|GZetec||yeah i was wondering the same. any major differences in driveability? same?better?|
|02-08-2007 03:14 PM|
|focus4free||Not sure of the process but I replaced mine with ATX fluid from Red-Line another fully synthetic very similar to RP and it works fine, no problems. I have been running the Synthetic for about 2 years. I believe the RP product line as well as Red-Line are pricey but very good and a good choice. I run the Red-Line motor oil as well.|
|02-08-2007 02:55 PM|
ATX fluid change with RP?
Iím wanting to flush and fill my automatic transmission fluid with Royal Purple Max ATF. My Haynes manual only states how to do the Transaxle fluid, and looks to be a pretty lengthy process. I thought the transaxle was a collection of components.
Is the Haynes manual basically stating how to change the ATX fluid?
Also, does anyone have any experience in doing this on an ATX and think the RP Max ATF is a good choice, or does anyone have any recommendations?