|07-14-2006 09:26 AM|
|elliottcarlose||drill holes it the plate holder and screw it to the body thats what I had to do to stop the rattle 4 12's causes|
|07-13-2006 11:34 PM|
|zzx32006||Had a problem with the wife's old ZX2's rear plate rattling when you close the trunk so I applied some double sided foam tape to the back of the plate .|
|07-12-2006 10:49 PM|
|ZX4STDoug||Oh okay..gotcha. I misunderstood. Sounds then like your idea should work to quiet things down. Good luck !|
|07-12-2006 10:01 PM|
|kathemius||the back of the plate is covered in dynamat. the plate holder is what's vibrating|
|07-12-2006 07:25 AM|
|ZX4STDoug||Have you tried gluing a couple of pieces of really dense foam to the back of the plate, so it doesn't bounce around and rattle on the hatch ?|
|07-11-2006 10:17 PM|
rear license plate holder
So, i've got the stock plastic license plate holder on my hatch, and well, only two of the screws actually tighten down, to hold the palte in place, even so, my plate still rattles, bought some dynamat, and that didnt fix the problem. So my next solution. 1/8" peice of steel or aluminium. Gonna got it to the side of my plate, drill the holes so i can secure it to the car, and get some fine thread bolts to secure license plate to it. if that doesnt stop the rattle, then i dont know what will.
Anyone else try anything similar?