MK3 Short shifter and solid bushings. - Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace


Go Back   Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum > Ford Focus Third Generation > MK3 Focus

MK3 Focus The place to chat about general questions, window tinting, exterior body, interior and lighting upgrades for the third generation 2012-Current Focus.

Search This Forum | Image Search | Advanced Search    
FocusFest FocusFanatics Merchandise

Reply




 
LinkBack Thread Tools Display Modes
Old 08-17-2014, 06:31 PM   #1
Focus Enthusiast
 
Join Date: Aug 2014
Fan#: 181473
Location: Quebec, Canada
What I Drive: 2014 Focus SE Sport 5Speed

Posts: 296
Points 662, Level 13
Points: 662, Level: 13 Points: 662, Level: 13 Points: 662, Level: 13
Level Up 24% Completed
Level up: 24% Level up: 24% Level up: 24%
Forum Activity 13%
Activity: 13% Activity: 13% Activity: 13%
FF Reputation: 1 Kent253 Good Standing Member
Buy-Sell-Trade Rating: (0)
MK3 Short shifter and solid bushings.

Today, I shortened the shifter in my Focus by 1 1/4 inch and installed "Solid base bushing shifter that I had on my ST. Makes a great difference. The shifting effort is slightly augmented and the feeling is solid.

I used James Barone Racing aluminium bushing, which are quality and inexpensive.

http://www.jamesbaroneracing.com/sho...roducts_id=593


Kent253 is offline  
    Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 08-17-2014, 07:25 PM   #2
Focus Fanatic
 
CunFFS13's Avatar
 
Join Date: Aug 2013
Fan#: 117411
Location: Cancun, Mexico
What I Drive: 2013 Sterling Gray Ford Focus S MT

Posts: 2,517
Points 2,478, Level 30
Points: 2,478, Level: 30 Points: 2,478, Level: 30 Points: 2,478, Level: 30
Level Up 19% Completed
Level up: 19% Level up: 19% Level up: 19%
Forum Activity 0%
Activity: 0% Activity: 0% Activity: 0%
FF Reputation: 6 CunFFS13 Good Standing Member
Buy-Sell-Trade Rating: (0)
You should wrote a "how to" with pictures
How do you shortened the shifter? Did you saw off the stick?
CunFFS13 is offline  
    Reply With Quote Quick reply to this message
Old 08-17-2014, 08:00 PM   #3
Focus Enthusiast
 
Join Date: Aug 2014
Fan#: 181473
Location: Quebec, Canada
What I Drive: 2014 Focus SE Sport 5Speed

Posts: 296
Points 662, Level 13
Points: 662, Level: 13 Points: 662, Level: 13 Points: 662, Level: 13
Level Up 24% Completed
Level up: 24% Level up: 24% Level up: 24%
Forum Activity 13%
Activity: 13% Activity: 13% Activity: 13%
FF Reputation: 1 Kent253 Good Standing Member
Buy-Sell-Trade Rating: (0)
Quote:
Originally Posted by CunFFS13 View Post
You should wrote a "how to" with pictures
How do you shortened the shifter? Did you saw off the stick?

I'm not really a 'how to" type of guy on an English forum since my first language is French. An "how to" is really not necessary. It is a pretty easy thing to do but if you want, I can find all the information you need about doing this modification and help you doing it.
Kent253 is offline  
    Reply With Quote Quick reply to this message
Old 08-18-2014, 08:04 AM   #4
Focus Addict
 
Join Date: Feb 2011
Fan#: 83279
Location: Roswell, GA
What I Drive: 2014 Ruby Red Titanium Hatch

Posts: 774
Points 4,827, Level 44
Points: 4,827, Level: 44 Points: 4,827, Level: 44 Points: 4,827, Level: 44
Level Up 39% Completed
Level up: 39% Level up: 39% Level up: 39%
Forum Activity 13%
Activity: 13% Activity: 13% Activity: 13%
FF Reputation: 3 roswelltop Good Standing Member
Buy-Sell-Trade Rating: (0)
Good morning Kent, Your post yesterday is amazingly timely to my upcoming project.

Were there any fitment problems with the solid base bushings, or was it an easy replacement? How would you judge the quality of the original bushings?

Many thanks, Kent.
roswelltop is offline  
    Reply With Quote Quick reply to this message
Old 08-18-2014, 09:16 AM   #5
Focus Enthusiast
 
Join Date: Aug 2014
Fan#: 181473
Location: Quebec, Canada
What I Drive: 2014 Focus SE Sport 5Speed

Posts: 296
Points 662, Level 13
Points: 662, Level: 13 Points: 662, Level: 13 Points: 662, Level: 13
Level Up 24% Completed
Level up: 24% Level up: 24% Level up: 24%
Forum Activity 13%
Activity: 13% Activity: 13% Activity: 13%
FF Reputation: 1 Kent253 Good Standing Member
Buy-Sell-Trade Rating: (0)
Quote:
Originally Posted by roswelltop View Post
Good morning Kent, Your post yesterday is amazingly timely to my upcoming project.

Were there any fitment problems with the solid base bushings, or was it an easy replacement? How would you judge the quality of the original bushings?

Many thanks, Kent.

No, they fit perfectly, like they were fitting on the ST. It is a very easy replacement (if you have some basic mechanical habilities) and they are no fittement issues. The original bushings are rubber so they take "that feeling" away. I cutted 1 1/4 inch, I would recomend going 1 1/2 or 1 3/4, not more.

This, combined with the E-Focus RMM and my car does not feel like a semi anymore.

The center console is tricky to un-assemble the first time around, but it was my 4th time so it took me 15 minutes to un-assemble the console, 10 mins removing the shifter, 1.5 hour un-assembling it, re-threading it and re-assembling it. and 30 minutes to put the car back together.
Kent253 is offline  
    Reply With Quote Quick reply to this message
Old 08-18-2014, 09:27 PM   #6
Focus Addict
 
ELCouz's Avatar
 
Join Date: Apr 2014
Fan#: 157898
Location: montreal, Canada
What I Drive: 2012 focus SE hatchback candy blue

Posts: 1,088
Points 2,499, Level 30
Points: 2,499, Level: 30 Points: 2,499, Level: 30 Points: 2,499, Level: 30
Level Up 33% Completed
Level up: 33% Level up: 33% Level up: 33%
Forum Activity 28%
Activity: 28% Activity: 28% Activity: 28%
FF Reputation: 3 ELCouz Good Standing Member
Buy-Sell-Trade Rating: (0)
Quote:
I'm not really a 'how to" type of guy on an English forum since my first language is French. An "how to" is really not necessary. It is a pretty easy thing to do but if you want, I can find all the information you need about doing this modification and help you doing it.
Go ahead...I will translate it for you hehehehe
ELCouz is online now  
    Reply With Quote Quick reply to this message
Old 08-24-2014, 09:34 AM   #7
Focus Addict
 
Join Date: Feb 2011
Fan#: 83279
Location: Roswell, GA
What I Drive: 2014 Ruby Red Titanium Hatch

Posts: 774
Points 4,827, Level 44
Points: 4,827, Level: 44 Points: 4,827, Level: 44 Points: 4,827, Level: 44
Level Up 39% Completed
Level up: 39% Level up: 39% Level up: 39%
Forum Activity 13%
Activity: 13% Activity: 13% Activity: 13%
FF Reputation: 3 roswelltop Good Standing Member
Buy-Sell-Trade Rating: (0)
A buddy, who is a Ford tech, installed my Ford Racing STS yesterday, along with the Steeda Focus ST solid shifter base bushings. I was amazed that he finished the replacement, with all trim pieces reinstalled perfectly, in just over 1 hour.

Ford Racing advertises an "18%" reduction in the throw. Honestly, it was impossible for me to envision as to how that would feel, so I really did not know what to expect.

Lemme tell ya, upon getting into the car for the first time after installation, the visual impact of the lowered shifter was a wonderful surprise, more than I expected. I did not measure the height from the top of the stock shifter to the top of the shifter bezel, but for the short shifter in neutral, it is 4 inches from the top point of the STS (by the 1-2-3 numbers) to the top of the bezel. I would guesstimate a height reduction of 1 to 1.25 inches.

Before starting up, I depressed the clutch and moved the lever through the gears---spongey feeling gone, shifter moved with deliberate feel through each of the gears.

Shifting while driving is more fun than ever. Pre-STS-, the shifter could feel kind of rubbery in the shift from 1 to 2. No more. No doubt about it, the throws between the gears are shorter. Much shorter. But, if you are looking for the shortest throw, I can tell you that the FR-STS is probably not for you, as it is obvious while shifting, that there is further reduction room. Also, there are less expensive choices.

I chose the FR because it is plug and play, I wanted Ford parts and my bud is a Ford tech.

Mike at White Bear Lake Ford gave me a 25%!discount off of retail! and the shifter arrived sooner than expected.

Picture is of the installed shifter.
Attached Images
 
roswelltop is offline  
    Reply With Quote Quick reply to this message
Old 08-24-2014, 09:38 AM   #8
Focus Addict
 
suss6052's Avatar
 
Join Date: Feb 2012
Fan#: 95752
Location: ..., MI
What I Drive: 2013 Ford Focus ST2 Ingot Silver

Posts: 13,422
Points 11,000, Level 69
Points: 11,000, Level: 69 Points: 11,000, Level: 69 Points: 11,000, Level: 69
Level Up 38% Completed
Level up: 38% Level up: 38% Level up: 38%
Forum Activity 15%
Activity: 15% Activity: 15% Activity: 15%
FF Reputation: 31 suss6052 Great Standing Member
Buy-Sell-Trade Rating: (3)
Quote:
Originally Posted by roswelltop View Post
A buddy, who is a Ford tech, installed my Ford Racing STS yesterday, along with the Steeda Focus ST solid shifter base bushings. I was amazed that he finished the replacement, with all trim pieces reinstalled perfectly, in just over 1 hour.

Ford Racing advertises an "18%" reduction in the throw. Honestly, it was impossible for me to envision as to how that would feel, so I really did not know what to expect.

Lemme tell ya, upon getting into the car for the first time after installation, the visual impact of the lowered shifter was a wonderful surprise, more than I expected. I did not measure the height from the top of the stock shifter to the top of the shifter bezel, but for the short shifter in neutral, it is 4 inches from the top point of the STS (by the 1-2-3 numbers) to the top of the bezel. I would guesstimate a height reduction of 1 to 1.25 inches.

Before starting up, I depressed the clutch and moved the lever through the gears---spongey feeling gone, shifter moved with deliberate feel through each of the gears.

Shifting while driving is more fun than ever. Pre-STS-, the shifter could feel kind of rubbery in the shift from 1 to 2. No more. No doubt about it, the throws between the gears are shorter. Much shorter. But, if you are looking for the shortest throw, I can tell you that the FR-STS is probably not for you, as it is obvious while shifting, that there is further reduction room. Also, there are less expensive choices.

I chose the FR because it is plug and play, I wanted Ford parts and my bud is a Ford tech.

Mike at White Bear Lake Ford gave me a 25%!discount off of retail! and the shifter arrived sooner than expected.

Picture is of the installed shifter.
The Ford Racing Short Throw shifter for the Focus ST advertises the 18% reduction, but it's closer to a 30% reduction on the N/A short throw shifter.
Quote:
tech notes
Fits 2012-2014 Ford Focus with five-speed manual transmission
30% shorter shift throws than OEM shifter
Nickel-plated shift handle prevents corrosion
http://www.fordracingparts.com/parts...KeyField=23001
__________________
Moderator for: DURATEC Ti-VCT Performance, ST Performance, MK3 Focus
suss6052 is online now  
    Reply With Quote Quick reply to this message
Old 08-24-2014, 09:49 AM   #9
Focus Addict
 
Join Date: Feb 2011
Fan#: 83279
Location: Roswell, GA
What I Drive: 2014 Ruby Red Titanium Hatch

Posts: 774
Points 4,827, Level 44
Points: 4,827, Level: 44 Points: 4,827, Level: 44 Points: 4,827, Level: 44
Level Up 39% Completed
Level up: 39% Level up: 39% Level up: 39%
Forum Activity 13%
Activity: 13% Activity: 13% Activity: 13%
FF Reputation: 3 roswelltop Good Standing Member
Buy-Sell-Trade Rating: (0)
Hey Suss, thank you ! I misspoke on the 18% figure.
roswelltop is offline  
    Reply With Quote Quick reply to this message
Old 08-24-2014, 10:17 AM   #10
Focus Addict
 
suss6052's Avatar
 
Join Date: Feb 2012
Fan#: 95752
Location: ..., MI
What I Drive: 2013 Ford Focus ST2 Ingot Silver

Posts: 13,422
Points 11,000, Level 69
Points: 11,000, Level: 69 Points: 11,000, Level: 69 Points: 11,000, Level: 69
Level Up 38% Completed
Level up: 38% Level up: 38% Level up: 38%
Forum Activity 15%
Activity: 15% Activity: 15% Activity: 15%
FF Reputation: 31 suss6052 Great Standing Member
Buy-Sell-Trade Rating: (3)
Quote:
Originally Posted by roswelltop View Post
Hey Suss, thank you ! I misspoke on the 18% figure.
You're welcome, although I'm surprised you went with the Steeda shifter base bushings rather than the JBR ones which do the same job but cost less. At least you didn't go with the anodized aluminum in various colors from Boomba for the same price as the Steeda bushings in an application where you'd never see them except during the initial install.
__________________
Moderator for: DURATEC Ti-VCT Performance, ST Performance, MK3 Focus
suss6052 is online now  
    Reply With Quote Quick reply to this message
Reply

Bookmarks & Social Networks

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
What I Drive
Year, color, and model of your car. Example: 2003 Pitch Black ZX3
Name
Your real name.
City
State
Country
Insurance
Please select your insurance company (Optional)

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 11:00 AM.


Copyright 2002-2015 FocusFanatics.com. All Rights Reserved : Privacy Policy : Advertise Information

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Mazda CX-3, Audi S3, Mazda MX-5 Miata and Acura TLX. You can find all Ford Focus, Focus ST and Focus RS related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area. If you own other makes have a look at Challenger Hellcat Forum, Charger Hellcat Forum, Cadillac ATS-V Forum, Cadillac ATS Forum, Cadillac CTS-V Forum, Lexus RC-F Forum, Lexus GS-F Forum, Mercedes GLA Forum, Mercedes GLE Forum, Civic Type-R Forum and Volvo XC90 Forum.





Search Engine Optimization by vBSEO 3.6.1