My low beam and high beam arnt working on drivers side but the sidelight is? Any help please
01-23-2013 02:47 PM
Its most likely that there is a short or loose connection somewhere in the drivers side. What i would do is start from the connection and work your way down. I wouldnt even bother checking the fuse becuase if the fuse was blown they both would be out not just one.
01-23-2013 02:57 PM
I took headlight out pushed connectors in and high beam works headlight has blown :)
01-24-2013 07:26 AM
Cheers to the working headlight [cheers]
01-26-2013 09:43 AM
High beam gone again :/ must be loose connections on the headunit itself, new headlight bulbs are here :) fitting tuesday as im off :)
01-27-2013 07:17 AM
The lowbeams have seperate fuses one for each side and a shared fuse for highbeams. Located under dash. Weird that the connection would be bad. With the locking mechanism and seals. I would check to see if anything has melted.