I have a 2009 coupe and I was wanting to replace the rear sway bar end links with some poly ones. I was also looking at replacing the bushings, but when i look around at some of the different sites they dont seem to have what i am looking for. So i was wondering if these would work for our years of car?
they have to be universal from energy suspension or whomever you ever like.
09-25-2012 08:06 AM
the bushings should work. we have a 20mm bar. as for the endlinks im not too sure. but i bought endliks for an asvt and they work so who knows
10-08-2012 10:57 AM
What I did with my ford aspire was I went to Moog's web site and found their p/n and went to NAPA's web site and converted the p/n and then call the counter for a stock check. This was for lower control arm bushings but I had them in my hand in about two and a half hours start to finish. I am not endorsing either of these vendors just trying to offer a method to resolve your problem.
10-08-2012 03:20 PM
I don't suppose anyone would know where I could get a set of Bushing Brackets would they... Not to hijack the thread or anything. Here is an idea of what I am looking for... Greasable would be tits.