I bought the Halo projectors for the 2008-2010 focus seen on k2motors and ebay.. i'll post the pics and discuss the lights afterwards
ok guys thanks for being patient. Install on this was pretty simple i followed this write up by bradwhite to remove the grill and headlights.
http://www.focusfanatics.com/forum/s...d.php?t=161006
This took about 15 mins. Overall install took about an hour and 15 minutes. I had some trouble separating the lights from the adaptors. I
also had a plug n play Hid kit (h13) in there also. I left that set up, so if (when) i decide to get hid's for these it'll be a 5min job. The lights fit
pretty well, they are the same as the oem so that wasn't even an issue. ok to the pics!!!!!!!
The low down on the bulbs are everything was plug and play into the stock harness. Except the led's and Angel eyes. I was unable to hook those up, so if anybody i out there can help me with that i would more than appreciate it. The bulbs on these lights are h9, and they are hi-beam and low beam. i took some pics of the light spread in the stock lights with hid's, and i'll try to get some pics of the new lights tomorrow for you guys. the cutoff on these is definitely more pronounced than the stock lights, and i'm pretty sure i'll end up throwing some h9 hid's in these too. Whew.. ok now lets discuss away, Lemme know if you like, if you don't, leave a reply.
ok guys thanks for being patient. Install on this was pretty simple i followed this write up by bradwhite to remove the grill and headlights.
http://www.focusfanatics.com/forum/s...d.php?t=161006
This took about 15 mins. Overall install took about an hour and 15 minutes. I had some trouble separating the lights from the adaptors. I
also had a plug n play Hid kit (h13) in there also. I left that set up, so if (when) i decide to get hid's for these it'll be a 5min job. The lights fit
pretty well, they are the same as the oem so that wasn't even an issue. ok to the pics!!!!!!!
The low down on the bulbs are everything was plug and play into the stock harness. Except the led's and Angel eyes. I was unable to hook those up, so if anybody i out there can help me with that i would more than appreciate it. The bulbs on these lights are h9, and they are hi-beam and low beam. i took some pics of the light spread in the stock lights with hid's, and i'll try to get some pics of the new lights tomorrow for you guys. the cutoff on these is definitely more pronounced than the stock lights, and i'm pretty sure i'll end up throwing some h9 hid's in these too. Whew.. ok now lets discuss away, Lemme know if you like, if you don't, leave a reply.