Retro fit electric seats on a MK1 Ford Focus
I have just swapped fabric seats in my wife’s Ford Focus MK1 for leather electric seats. The electric seats allow for heating and up/ down movement. Luckily moving the seat forward and back is still manual.
If possible I would really like to wire up the seats for full functionality, but I’m not sure how to go about it. I guess I need switches for the heated seats that I could fit close to the seat height adjustment switch, but how I go about wiring it all up I don’t know.
In the electric seat I have a wiring block as per the attachment.
1 = Black & Red and Black
2 = Orange & Yellow and two black wires, one thicker than the other
3 = Green & Blue and Black
4 = Red & Green and Blue and Green
5 = Green & Blue and Blue and Black
I’ve checked under the centre consul and can’t see any wiring that might have been for the seats. The wiring block for the fabric seats is the same but I only have wiring for terminal 5.
Any help would be much appreciated. Thanks in advance!
Im also trying to figure this out. I have fitted mk1 st170 half leathers with airbags and electric adjuster but only have one set of wires for my seats. Has anybody solved this. Could you please help by letting us know.
Thanks in advance.
|All times are GMT -5. The time now is 11:52 PM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.