Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (
-   MK1 Focus (
-   -   How to completely remove front fenders (

gthang 12-17-2004 09:31 AM

How to completely remove front fenders
I may be getting some carbon fiber fenders, and wanted to be able to install them myself.

Unfortunately, I've found that you have to remove the front bumper first, but in order to remove the front bumper, you have to remove the fenders first...

What I mean is is that the front fenders are hard to get off, and the front bumper removed will help out, but not much. In fact, there is a clip that holds the fender onto the front bumper...

And removing the front bumper is difficult, since the instructions I have do not work. the instructions I have are from how-to section. The instructions do not mention undoing a bolt that is underneath the car near the top vertex of the headlight. And this bolt is in a pretty tight spot.

The only area I'm having trouble removing the fender is where the fender meets the door and the sideskirts. Now I know there's a bolt that's only accessible via the door jamb. It's the area near that jack site that I'm stuck at.

If anyone has any information on this, please post.


the illest 12-17-2004 03:38 PM

It's actually pretty easy... I had to take mine off and put them back on not too long ago.

You don't have to remove the bumper, and it doesn't make it any easier (at least mine was really easy with it still on). If you're having trouble there, remove that little piece of the sideskirt that's not attached to the rest, all you have to do is take out the bolt and then slide it off toward the wheel.

That's how I did it on my 2000 ZX3 at least... hope it'll work for you.

03Z_ex_Three 12-18-2004 03:24 AM

1. pop the hood. 2. unscrew the bolts under the hood that hold the fender in. 3. unscrew the bolts that are on the bottom right side of the fender. 4. unscrew any bolts that connect the splash guard and the fender. 5. unscrew the screws that connect the bumber to the fender. And you're done.

CKA 12-18-2004 04:02 PM

We actually had no problem taking them off, it was easy and we didn't even have remove the front the bumper, only thing we had 2 take out were the headlights.

slammedfoci 12-18-2004 07:41 PM

You have to take the grill out to take the headlights out and then you can get to those bolts on the inside front fender. Some thing like that.

the illest 12-19-2004 02:05 AM

"The only area I'm having trouble removing the fender is where the fender meets the door and the sideskirts."

I don't think he's having a problem with the front guys...

CKA 12-19-2004 11:29 AM

Yeah, there r a couple bolts on that side, that u need 2 get off. But that is all. ^^^^

All times are GMT -5. The time now is 12:09 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.