Hatch Euro tails wiring question I have bulb sockets and pigtail harness
1. I have the bulb holders and the harness that goes to the bulbs do I still have to do the wiring deal under the glove box or can I cut off my plug from the US spec tails and wire it up to the Euro tails harness and just leave the Reverse wire un plugged?
I don't want to run a bunch of wire through the hatch I want it as factory as possible, preferably plug and play.
2. Will the hazard switch work correctly after this mod? "only orange flashing out back"
3. Ive found like 5 different how to's???? which is the best one to use
You are still going to have to re-wire your car. Simply adding Euro pigtails will not solve the separate turns. Only way to separate the turns is to re-wire your GCM. Best how-to is this one:
That is how I did mine:)
If you use the how-to I posted, your hazard switch will work correctly as well.
^^^ Thank you Pyro.... running 2 wires all the way back is a bitch...
what about this? I will be soldering no bs scotch locks
Yes, that is another good thread. The diagram you posted is what you need to do for the GEM, you will still have to pull the D/S hatch carpet off to re-wire that also.
cool man thank you and the bulbs in the euro tails look like 1156 for turn and 1157 for running/brakes is this correct
|All times are GMT -5. The time now is 01:56 PM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.