Hey guys i just vinyl wrapped my grille but i left the grill in place im thinking about redoing it in the summer but i need to know how to remove the grille can anyone tell me how to do this. I could figure it out but I dont want to break anything....
This is for a 2005-there may be a slight difference in mounting.
1) Open the hood and remove the plastic cover from the rad support. This is done by backing out the plastic Phillips head screws and carefully prying out the plastic clips.
2) remove the bolts that hold the two straps from the top of the grille to the rad support.
3) There are two tabs that come out of the bottom of the grille (center) and snap into slots on the bumper cover. Lift the end of these up to release them.
4) Pull the bottom of the grille forward to and its out. You can do this in about 20 minutes.
Thanks this will be useful when I go to vinyl wrap my grill
|All times are GMT -5. The time now is 07:59 AM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.